Burris Optics 4-16×50 Eliminator III Laser Rangefinder/Riflescope X96 Reticle and Fixed Switch

When every second counts the Burris Optics 4-16×50 Eliminator III Laser Rangefinder Riflescope eliminates the need to waste time switching between your rangefinder and rifle – just tap, adjust your aim, and pull the trigger. Optically, the Burris Optics 4-16×50 Eliminator is outfitted with a wide and versatile zoom range and an objective that has excellent low-light capabilities for accurate target identification at dawn and dusk, or under a heavy canopy. Index matched, multi-coated optics further boost the low-light abilities while also improving color rendition and contrast.

The laser rangefinder rifle scope accurately ranges targets from 50 to 1200 yards, and is complemented with a built-in inclinometer that measures the upward or downward angle relative to the target. A bullet drop compensation system that uses the measured range, angle, and the user-inputted information on the cartridge in use, to activate and illuminate a adjusted aim point on the reticle. The Burris Optics laser rangefinder rifle scope can be programmed for hundreds of commercial loads or, if shooting custom rounds, users may choose a commercial load with specs most closely matching the custom rounds.

Designed to withstand the rigors of the wild, the housing is made of durable and lightweight 6061 T6 aluminum with a scratch and corrosion-resistant matte-black anodized finish. Its one-piece main-tube is nitrogen-filled and O-ring sealed to give it waterproof and fogproof performance. For a solid connection, the scope mounts on standard Picatinny/Weaver rail systems. This version of the Eliminator has ergonomically-placed activation switches on both sides of the housing directly behind the objective bell. This enables easy activation with a simple movement of the support hand.

Optical Performance

• 4-16x zoom magnification
• 50mm objective lens
• Index-matched, Hi-Lume multi-coated optics
• Increases light transmission
• Improves color rendition and contrast
• Reduces glare
• 26-7′ field of view at 100 yards
• 3.5-4″ eye relief
• 12.5-3.1mm exit pupil

Rangefinder

• Class 1 eye-safe IR laser
• Effective range:
• Deer: 50-750 yards
• Reflective target: 50-1,200 yards
• Ranging accuracy:
• <100 yd: ±1 yd
• 100-550 yd: ±2 yd
• 550+ yd: ±3 yd
• Measures distance in yards or meter
• Runs on one included CR123A battery

X96 Reticle

• Partially-illuminated
• Five selectable brightness settings
• Crosshairs with dots for windage and BDC adjustments
• Illuminated dots automatically illuminated to show proper aiming point
• Non-illuminated Windage offset dots further improves accuracy
• Reticle placed on the rear (second) focal plane
• Parallax-free out to 50 yards

Technologies

• Built-in inclinometer
• Measures upward or downward angle relative to target
• Measures angles up to ±45°, relative
• Ballistic compensation algorithm:
• Uses range, angle and ammo to provide an adjusted range
• Illuminates the appropriate BDC aiming point on reticle
• Program ammo load for improved ballistic drop compensation calculation
• Designed for use with centerfire rifles only
• Programming saves in memory and is retained when changing batteries
• Adjusts aiming point for magnification scope is set to
• Displays an error if the range measured is further than the ammunition’s maximum effective distance

Use and Handling

• Turrets
• Capped to prevent dirt and mud from entering mechanism
• Caps also prevent accidental adjustments when moving through dense brush
• Resettable to zero after initial sighting
• 1/8 MOA per click shot compensation
• ±20 MOA windage/elevation adjustment range
• Adjustable objective parallax correction
• In-view LED display shows adjusted aiming point, range, battery status, and windage hold-off
• Activation
• Dual buttons for left or right-hand shooter
• Placed forward on scope for easy use with support hand without moving it too much
• Reticle brightness and set-up buttons discreetly placed out of the way

Construction Details

• Mount
• Integrated 8.5″ Picatinny/Weaver rail
• No rings required
• 6061 T-6 aluminum housing
• One-piece main-tube
• Scratch and corrosion-resistant matte-black anodized finish
• Nitrogen-filled, water and fogproof
• Double, internal-spring tension system holds zero through shock, recoil, and vibrations
• Weight: 30.4 ounces, including mount and battery