AGM Secutor TS50-384 – Compact Medium Range Thermal Imaging Rifle Scope 384x288 (50 Hz), 50 mm lens
Discover Incredible Savings Without Compromising On Quality
Bering Optics Rubicon Pro Waterproof Reflex sight with a front control button MKP
Pulsar Thermion 2 LRF XP50 PRO Thermal Imaging Riflescopes MKP
Pulsar Thermion Duo DXP50 Multispectral Thermal Riflescope MKP
Pulsar Thermion Duo DXP55 Multispectral Thermal Riflescopes MKP
Pulsar Merger LRF XL 50 Thermal Imaging Rangefinding Binoculars MKP
AGM Anaconda-Micro TC50-384 Compact Medium Range Thermal Imaging Clip-On 384x288 (50 Hz), 50 mm lens
The AGM Anaconda TC50-Micro thermal imaging clip on system enables the operator to convert their daytime scope into a thermal imaging device. AGM Anaconda TC50-Micro TI clip on scope is based on longwave thermal imaging 384x288, 50 Hz sensor, 1024x768 display and designed for day and night operation. 50mm F/1.1 germanium lens is a great option for medium range engagements. Uncooled thermal imaging cuts through dust, smoke, fog, haze, and other obscurants. Its use cannot be detected, as it emits no visible light or RF energy and operates without the use of illuminators or IR lights. No shift of zero or POI. The AGM Anaconda TC50 Micro thermal imaging clip on allows the user to maintain consistent eye relief and shooting position, and because the user views his own day scopes reticle (which he is familiar with), no re-training is required. Over 1000 yards detection range. AGM Anaconda is ideal for tactical and hunting applications with day time optics having small magnification and objective lenses up to 50mm. Powered with two CR123 batteries Anaconda TC-Micro gives up to 5 hours of continues work and optional external battery pack with high-capacity is capable of increasing the total operation time to up to 44 hours. The AGM Anaconda TC50 Micro can be also connected to an optional video recorder for shooting real time video or external Wi-Fi module for conjunction with smartphones.
AGM Anaconda-Micro TC50-384 Compact Medium Range Thermal Imaging Clip-On 384x288 (50 Hz), 50 mm lens
|
Color: |
Black |
|
Magnification: |
1 x |
|
Objective Lens Diameter: |
50 mm |
|
Sensor Resolution: |
384x288 Pixels |
|
Display Resolution: |
1024x768 Pixels |
|
Field of View, Angle: |
7.4 - 5.6 degrees |
|
Diopter Adjustment Range: |
-5 - 5 dpt |
|
Focus Range: |
5 m |
|
Battery Type: |
CR123 |
|
Battery Life: |
5 hours |
|
Operating Temperature: |
-25 - 50 Celsius |
|
Water Resistance Level: |
Waterproof |
|
Weight: |
0.94 lb |
|
Battery Quantity: |
2 |
AGM Anaconda-Micro TC50-384 Compact Medium Range Thermal Imaging Clip-On 384x288 (50 Hz), 50 mm lens
The AGM Anaconda TC50-Micro thermal imaging clip on system enables the operator to convert their daytime scope into a thermal imaging device. AGM Anaconda TC50-Micro TI clip on scope is based on longwave thermal imaging 384x288, 50 Hz sensor, 1024x768 display and designed for day and night operation. 50mm F/1.1 germanium lens is a great option for medium range engagements. Uncooled thermal imaging cuts through dust, smoke, fog, haze, and other obscurants. Its use cannot be detected, as it emits no visible light or RF energy and operates without the use of illuminators or IR lights. No shift of zero or POI. The AGM Anaconda TC50-Micro thermal imaging clip on system allows the user to maintain consistent eye relief and shooting position, and because the user views his own day scopes reticle (which he is familiar with), no re-training is required. Over 1000 yards detection range. AGM Anaconda is ideal for tactical and hunting applications with day time optics having small magnification and objective lenses up to 50mm. Powered with two CR123 batteries Anaconda TC-Micro gives up to 5 hours of continues work and optional external battery pack with high-capacity is capable of increasing the total operation time to up to 44 hours. The AGM Anaconda TC50 Micro can be also connected to an optional video recorder for shooting real time video or external Wi-Fi module for conjunction with smartphones.
Features of Anaconda TC50-Micro 1x50 Thermal Imaging Clip-On Scope System
- Simple and Quick conversion of daytime scope to Thermal Imaging
- Mounts in front of any daytime scope, no re-zeroing required
- High-resolution thermal imaging
- Compact, lightweight, durable housing
- True magnification
- High-end display
- Waterproof
- External Wi-Fi module via micro USB
- External power supply via micro USB
- Powered with two CR123 batteries
|
Color: |
Black |
|
Magnification: |
1 x |
|
Objective Lens Diameter: |
50 mm |
|
Sensor Resolution: |
384x288 Pixels |
|
Display Resolution: |
1024x768 Pixels |
|
Field of View, Angle: |
7.4 - 5.6 degrees |
|
Diopter Adjustment Range: |
-5 - 5 dpt |
|
Focus Range: |
5 m |
|
Battery Type: |
CR123 |
|
Battery Life: |
5 hours |
|
Operating Temperature: |
-25 - 50 Celsius |
|
Water Resistance Level: |
Waterproof |
|
Weight: |
0.94 lb |
|
Battery Quantity: |
2 |
Thermal Imaging
Please note that most thermal devices are built per order. It may take 3-5 days or more for your order to ship. If timely shipping is important to you, please, contact us to verify availability prior to ordering.
Thermal devices can produce various types of images. Some are color others are monochrome. In either case change in shade or color indicates temperature differences.
Here is how thermal imaging devices work...
A special lens focuses the infrared light emitted by all of the objects in view.
The focused light is scanned by a phased array of infrared-detector elements. The detector elements create a very detailed temperature pattern called a thermogram. It only takes about one-thirtieth of a second for the detector array to obtain the temperature information to make the thermogram. This information is obtained from several thousand points in the field of view of the detector array.
The thermogram created by the detector elements is translated into electric impulses.
The impulses are sent to a signal-processing unit, a circuit board with a dedicated chip that translates the information from the elements into data for the display.
The signal-processing unit sends the information to the display, where it appears as various colors depending on the intensity of the infrared emission. The combination of all the impulses from all of the elements creates the image.
There are a few key Manufacturers when it comes to thermal imaging.
ATN: produce such well knows devies as ThOR-HD thermal scope, BINOX-THD thermal binoculars, and OTS-HD thermal monocular.
FLIR/Armasight: the largest maker of consumer level thermal products is well knows for their full product line. Zeus thermal scopes, Q14 and Scout monoculars, Helios and Scout binoculars and many more.
Pulsar: a very popular brand for digital night vision and thermal imaging. Key products include Pulsar Trail and Apex thermal scopes and Pulsar Helion and Quantum thermal monoculars.
Seek: mobile device mounted thermal cameras are the main products of this brand.
Delivery Time and Manufacturing Process for AGM Anaconda-Micro TC50-384 Compact Medium Range Thermal Imaging Clip-On 384x288 (50 Hz), 50 mm lens:
Most of our manufacturers do not keep products like AGM Anaconda-Micro TC50-384 Compact Medium Range Thermal Imaging Clip-On 384x288 (50 Hz), 50 mm lens assembled on the shelf. Night Vision tubes are kept separate from the body of the unit. When the order is placed, the manufacturer starts the order processing and assembly process which includes the following:
- Order processing - we collect all the necessary information including address and phone numbers. We also make sure that our customer ordered the correct product for their needs and that the product can be exported by US law to the country of destination. In some cases a signed export compliance form is required.
- QC - in this step the manufacturer will inspect all individual parts which will be used to assemble the night vision device for any defects.
- Production & Assembly - during production, all the parts are put together. Night Vision tubes in inserted into the body of the unit and all the complex electronics for the device are connected. This process takes place in a special lab called the "clean room" as even a small speckle of dust can cause undesired optical effect.
- QA - one the night vision device is assembled, it goes through a rigorous testing process to make sure it meets all the expected specifications and all parts function as expected. For this most manufacturers have a special "dark room" designed to allow testing of the units without causing incidental damage to the night vision tube by exposure to bright light.
- Packaging - this is a key process as well. In most case your night vision device will be shipped to you directly from the manufacturer but sometimes needs to be sent to us first. In either case items need to be packaged securely to avoid any kind of damage during transportation.
- Shipping - as described above items will most of the time ship from the manufacturer. For most domestic orders (unless shipping to POB or AFB) a premium shipper like FedEx or UPS will be used.
Only by following the above steps can we along with our manufacturers bring you - our customer - night vision products of highest quality, However as you can understand the above process can take several days to complete. For example if your device fails QA, the entire process restarts. Also at QC stage a manufacturer may realize that the tube they have in stock has a defect and a replacement tube needs to be ordered. Due to the complexity of this process, it is prudent to expect 3-4 business days for production and handling of the purchased device. Keep in mind that this process is designed to guarantee your satisfaction with the night vision device of your choice. It occasionally possible to expedite the process for urgent orders but addional fees or other restrictions may apply.
