ATN PVS14-3WHPT, Night Vision Monocular 51 FOV - High-Performance FOM 2200-2375 Gen 3 Auto-Gated, P45 White Phospher made in USA

SKU
NVMPPVS1453WHP
$5,695.00
Add to Compare
0% APR for 6/12 months or interest bearing for 36 months*

The PVS-14 night vision monocular is the standard-issue U.S. military night vision optic and is used by special ops units throughout the world. These units boast the highest quality in optics, design, and functionality. Their versatility makes them the premier choice for law enforcement and military professionals. PVS-14 units can be mounted on a helmet for hands-free use, behind weapon optics, or simply used as handheld devices. The PVS-14 provides night vision assistance to one of the operator’s eyes, leaving the other to retain its natural night vision. This is important when operating in changing light conditions in the field, allowing users to switch between aided and unaided vision seamlessly. Military and law enforcement operators require the ability to instantly switch between dynamic light conditions as the situation develops. The PVS-14 can be assembled with various levels of Image Intensifier tubes. ATN, being a premier manufacturer, has access to the best High-Performance tubes from leading U.S. Image Intensifier Manufacturers on the Market, such as L3 and Elbit. Our professionally-trained and experienced technicians assemble the PVS-14 according to Mil-Spec Standards, using factory-new parts and current production image intensifier tubes. Additional features include IR on and low battery indicators, manual brightness control, an auto-shut off function that deactivates the device within seconds when accidentally exposed to bright light, and an integrated IR illuminator for use in extremely low light conditions. When you seek the pinnacle of night vision units, use what the U.S. Military does: the PVS-14.

Generation Gen 3, White Phospher, Auto-Gated/Thin-Filmed
Magnification 1X
Resolution 64-72lp/mm
FOV 51 °
Lens System f/1.2, 27 mm
Proshield Lens Coating Yes
Range of Focus 0.25 yard/m to infinity
Diopter Adjustment -5 to +2
Automatic Brightness Control Yes
Bright Light Cut-off Yes
Infrared Illuminator Built-in
IR Indicator Yes
Low Battery Indicator Yes
Power Supply 1 x 1.5V (AA type battery)
Battery Life 50 hours
Environmental Rating Water resistant
Operating Temperature -60°F to 120°F/-51°C to 49°C
Storage Temperature -60°F to 185°F/-51°C to 85°C
Dimensions 4.5" x 2" x 2.25"/114 mm x 51 mm x 57 mm
Weight 0.78 lbs / 0.35 kg
Manual Gain Control Yes
Automatic Shut-off System Yes
MIL-STD-810 Compiles
Country of Origin USA
Available for Export No
Warranty 3 years

• MIL-STD-810


• LIGHTWEIGHT


• 1X MAGNIFICATION


• BRIGHTNESS CONTROL


• BRIGHT LIGHT CUT-OFF


• WATERPROOF


• HANDHELD OR HEADMOUNTED AS SINGLE EYE GOGGLE

Gen 3 Night Vision

Please note that most high end night vision devices are built per order.  It may take 3-5 days or more for your order to ship.  If timely shipping is important to you, please, contact us to verify availability prior to ordering.

By adding a sensitive chemical, gallium arsenide to the photocathode a brighter and sharper image has been achieved over 2nd generation units. An ion barrier film was also added to increase tube life. 3rd Gen. provides the user with good to excellent low light performance. 3rd Gen. Standard IIT Our standard 3rd generation image intensifier tubes are of the highest quality. They have a micro channel plate, GaAs photocathode, and a completely self-contained integral high-voltage power supply. These 3rd Generation tubes provide a combined increase in resolution, signal to noise and photosensitivity over tubes with a multi-alkali photocathode. Generation 3 is the standard for the USA military.

3rd Gen. Standard IIT Features:

• Photo Cathode type: Gallium Arsenide
• Resolution 64 lp/mm
• Signal-to-Noise Ratio 22 Typical
• 10,000-hour tube life

Delivery Time and Manufacturing Process for ATN PVS14-3WHPT, Night Vision Monocular 51 FOV - High-Performance FOM 2200-2375 Gen 3 Auto-Gated, P45 White Phospher made in USA:

Most of our manufacturers do not keep products like ATN PVS14-3WHPT, Night Vision Monocular 51 FOV - High-Performance FOM 2200-2375 Gen 3 Auto-Gated, P45 White Phospher made in USA assembled on the shelf. Night Vision tubes are kept separate from the body of the unit. When the order is placed, the manufacturer starts the order processing and assembly process which includes the following:

  • Order processing - we collect all the necessary information including address and phone numbers. We also make sure that our customer ordered the correct product for their needs and that the product can be exported by US law to the country of destination. In some cases a signed export compliance form is required.
  • QC - in this step the manufacturer will inspect all individual parts which will be used to assemble the night vision device for any defects.
  • Production & Assembly - during production, all the parts are put together. Night Vision tubes in inserted into the body of the unit and all the complex electronics for the device are connected. This process takes place in a special lab called the "clean room" as even a small speckle of dust can cause undesired optical effect.
  • QA - one the night vision device is assembled, it goes through a rigorous testing process to make sure it meets all the expected specifications and all parts function as expected. For this most manufacturers have a special "dark room" designed to allow testing of the units without causing incidental damage to the night vision tube by exposure to bright light.
  • Packaging - this is a key process as well. In most case your night vision device will be shipped to you directly from the manufacturer but sometimes needs to be sent to us first. In either case items need to be packaged securely to avoid any kind of damage during transportation.
  • Shipping - as described above items will most of the time ship from the manufacturer. For most domestic orders (unless shipping to POB or AFB) a premium shipper like FedEx or UPS will be used.

Only by following the above steps can we along with our manufacturers bring you - our customer - night vision products of highest quality, However as you can understand the above process can take several days to complete. For example if your device fails QA, the entire process restarts. Also at QC stage a manufacturer may realize that the tube they have in stock has a defect and a replacement tube needs to be ordered. Due to the complexity of this process, it is prudent to expect 3-4 business days for production and handling of the purchased device. Keep in mind that this process is designed to guarantee your satisfaction with the night vision device of your choice.  It occasionally possible to expedite the process for urgent orders but addional fees or other restrictions may apply.

footer image footer image
Currently there are no reviews for this product. Be the first to add a review
Write Your Own Review
Currently there are no Q&As for this product Be the first to ask a question

Loading, please wait...