ATN ThOR LT 4-8x Thermal Rifle Scope Package BF

This product is no longer available
Please consider this similar product instead
ATN Thor-LTV, 4-12x

ATN ThOR LT 4-8x Thermal Rifle Scope TIWSTLT148X

The new ATN ThOR LT 4-8x Thermal Rifle Scope series is built with quality and affordability in mind. Designed for close range target acquisition and made with aluminum alloy the scope is lightweight and looks more like a traditional day time scope optic, which provides the ability to use standard and readily available 30mm rings. Save your ammo with one shot zero. Easy controls and mounting. There are two color modes – White Hot and Black Hot. With Identification range of 160 yards, the ATN ThOR LT is based on 160x120 60Hz thermal bolometer sensor, 1280x720p HD display and 24mm objective lens.  The ATN Thor LT 4-8x Thermal Rifle Scope can be operated day or night and features variable digital magnification from 4x to 8x, USB-C charging, 10-plus hours of continues battery power, 90mm eye relief and 3-year warranty.

Features of ATN ThOR LT 4-8x Thermal Rifle Scope:

  • Black hot/white hot viewing modes
  • One shot zero
  • Weather resistant
  • Recoil resistant
  • Can be mounted onto crossbows, air rifles, and other platforms due to lightweight construction
  • ATN Obsidian Core LT
  • 3D Accelerometer
  • Multiple reticle patterns

Package Contents:

  • ATN ThOR LT 4-8x Thermal Rifle Scope
  • Lens Tissue
  • Eyecup
  • USB-C Cable
  • Scope Cover

Specifications for ATN ThOR LT 4-8x Thermal Rifle Scope:

Color:

Black

Magnification:

4 - 8 x

Tube Diameter:

30 mm

Sensor Resolution:

160x120 Pixels

Display Resolution:

1280x720 Pixels

Refresh Rate:

60 Hz

Reticle:

Multiple

Eye Relief:

90 mm

Attachment/Mount Type:

30mm Standard Rings

Battery Type:

Lithium Ion Battery

Battery Life:

10+ hours

Operating Temperature:

-28 - 48 Celsius, -20 - 120 Fahrenheit

Weather Resistance:

Yes

Length:

292 mm, 11.5 in

Width:

56 mm, 2.2 in

Height:

2.2 in, 55 mm

Weight:

650 g, 1.4 lb

Additional Features:

3D Accelerometer, White Hot/Black Hot Color Modes, ATN Obsidian Core LT

Included Accessories:

Eyecup, Lens Tissue, Scope Cover, USB-C Cable

 

 

ATN ThOR LT 4-8x Thermal Rifle Scope 

The new ATN ThOR LT 4-8x Thermal Rifle Scope series is built with quality and affordability in mind. Designed for close range target acquisition and made with aluminum alloy the scope is lightweight and looks more like a traditional day time scope optic, which provides the ability to use standard and readily available 30mm rings. Save your ammo with one shot zero. Easy controls and mounting. There are two color modes – White Hot and Black Hot. With Identification range of 160 yards, the ATN ThOR LT is based on 160x120 60Hz thermal bolometer sensor, 1280x720p HD display and 24mm objective lens.  Thor LT can be operated day or night and features variable digital magnification from 4x to 8x, USB-C charging, 10-plus hours of continues battery power, 90mm eye relief and 3-year warranty.

Specifications for ATN ThOR LT 3-6x Thermal Rifle Scope: 

Color:

Black

Magnification:

4 - 8 x

Tube Diameter:

30 mm

Sensor Resolution:

160x120 Pixels

Display Resolution:

1280x720 Pixels

Refresh Rate:

60 Hz

Reticle:

Multiple

Eye Relief:

90 mm

Attachment/Mount Type:

30mm Standard Rings

Battery Type:

Lithium Ion Battery

Battery Life:

10+ hours

Operating Temperature:

-28 - 48 Celsius, -20 - 120 Fahrenheit

Weather Resistance:

Yes

Length:

292 mm, 11.5 in

Width:

56 mm, 2.2 in

Height:

2.2 in, 55 mm

Weight:

650 g, 1.4 lb

Additional Features:

3D Accelerometer, White Hot/Black Hot Color Modes, ATN Obsidian Core LT

Included Accessories:

Eyecup, Lens Tissue, Scope Cover, USB-C Cable

 

Thermal Imaging

Please note that most thermal devices are built per order.  It may take 3-5 days or more for your order to ship.  If timely shipping is important to you, please, contact us to verify availability prior to ordering. 

Thermal devices can produce various types of images.  Some are color others are monochrome.  In either case change in shade or color indicates temperature differences.

color thermal image thermal bw image

Here is how thermal imaging devices work...

A special lens focuses the infrared light emitted by all of the objects in view.

The focused light is scanned by a phased array of infrared-detector elements. The detector elements create a very detailed temperature pattern called a thermogram. It only takes about one-thirtieth of a second for the detector array to obtain the temperature information to make the thermogram. This information is obtained from several thousand points in the field of view of the detector array.

The thermogram created by the detector elements is translated into electric impulses.

The impulses are sent to a signal-processing unit, a circuit board with a dedicated chip that translates the information from the elements into data for the display.

The signal-processing unit sends the information to the display, where it appears as various colors depending on the intensity of the infrared emission. The combination of all the impulses from all of the elements creates the image.

There are a few key Manufacturers when it comes to thermal imaging.  

ATN: produce such well knows devies as ThOR-HD thermal scope, BINOX-THD thermal binoculars, and OTS-HD thermal monocular.  

FLIR/Armasight: the largest maker of consumer level thermal products is well knows for their full product line.  Zeus thermal scopes, Q14 and Scout monoculars, Helios and Scout binoculars and many more.

Pulsar: a very popular brand for digital night vision and thermal imaging.  Key products include Pulsar Trail and Apex thermal scopes and Pulsar Helion and Quantum thermal monoculars.

Seek: mobile device mounted thermal cameras are the main products of this brand.

Delivery Time and Manufacturing Process for ATN ThOR LT 4-8x Thermal Rifle Scope Package BF:

Most of our manufacturers do not keep products like ATN ThOR LT 4-8x Thermal Rifle Scope Package BF assembled on the shelf. Night Vision tubes are kept separate from the body of the unit. When the order is placed, the manufacturer starts the order processing and assembly process which includes the following:

  • Order processing - we collect all the necessary information including address and phone numbers. We also make sure that our customer ordered the correct product for their needs and that the product can be exported by US law to the country of destination. In some cases a signed export compliance form is required.
  • QC - in this step the manufacturer will inspect all individual parts which will be used to assemble the night vision device for any defects.
  • Production & Assembly - during production, all the parts are put together. Night Vision tubes in inserted into the body of the unit and all the complex electronics for the device are connected. This process takes place in a special lab called the "clean room" as even a small speckle of dust can cause undesired optical effect.
  • QA - one the night vision device is assembled, it goes through a rigorous testing process to make sure it meets all the expected specifications and all parts function as expected. For this most manufacturers have a special "dark room" designed to allow testing of the units without causing incidental damage to the night vision tube by exposure to bright light.
  • Packaging - this is a key process as well. In most case your night vision device will be shipped to you directly from the manufacturer but sometimes needs to be sent to us first. In either case items need to be packaged securely to avoid any kind of damage during transportation.
  • Shipping - as described above items will most of the time ship from the manufacturer. For most domestic orders (unless shipping to POB or AFB) a premium shipper like FedEx or UPS will be used.

Only by following the above steps can we along with our manufacturers bring you - our customer - night vision products of highest quality, However as you can understand the above process can take several days to complete. For example if your device fails QA, the entire process restarts. Also at QC stage a manufacturer may realize that the tube they have in stock has a defect and a replacement tube needs to be ordered. Due to the complexity of this process, it is prudent to expect 3-4 business days for production and handling of the purchased device. Keep in mind that this process is designed to guarantee your satisfaction with the night vision device of your choice.  It occasionally possible to expedite the process for urgent orders but addional fees or other restrictions may apply.

footer image footer image
Currently there are no reviews for this product. Be the first to add a review
Write Your Own Review
Currently there are no Q&As for this product Be the first to ask a question

Loading, please wait...