Elcan Specter DR 6x/1.5x, 5.56 Reticle, Adjust A.R.M.S. Levers & 4MOA XOPTEK Installed, with Flip Covers & ARD, FDE

SKU
DFOV156-F1-X4
This product is no longer available
Please consider this similar product instead
ELCAN Specter DR 1.5x/6x 5.56 BDC Reticle, FDE

The ELCAN SpecterDR 1.5x/6x is the second evolution in the family of Dual Role Optical Sights. Based upon the battle-proven SpecterDR design, the SpecterDR 1.5x/6x provides higher magnification to enable greater precision and longer engagement ranges, while at the same time providing exceptional field of view in CQB mode.

The SpecterDR 1.5x/6x enjoys ELCAN’s famous crystal-clear optics as well as a generous eye relief, making it the ideal instrument for designated marksman rifles and other long range applications. As with all SpecterDR sights, the magnification and field of view can be changed instantly with the throw of a lever. Depending upon the situation, the user may adjust the sight to illuminate the crosshair or just a brilliant red dot in the center. Because the reticles are etched in glass, they are plainly visible even in the case of loss of electrical power due to battery failure or EMP.

Adjustable A.R.M.S. Levers

Standard integral A.R.M.S. and adjustable A.R.M.S. levers 

The New MK-II Lever® features a built-in precision adjustment wheel allowing finger tip (no tool) selection to desired tension to fit variations in 1913 Mil-Std Dimensions.  The mounts adjustment wheel comes pre-gauged and locked to the center of the Mil-Std dovetail specs.  The hash marks to the left or right of the adjustment wheels white marked indicator line, represent .002

XOPTEK™ Micro Reflex Sight

The XOPTEK™ Micro Reflex Sight is an included option on your SpecterDR 1x/4x. The XOPTEK™ Micro Reflex Sight is designed as a lightweight rapid aiming device for pistols and carbines and as an auxiliary sight for long-range magnified optical sights. In operation, the sight projects a brilliantly illuminated red dot into the user's field of view to act as a precise aiming point for close to mid-range targets.

The SpecterDR family offers the best single solution for Long Range and CQB engagements and is designed to withstand the rigors of modern professional use.

Reticle 5.56 (CX5455)

The Specter DR provides two reticle modes: A Red Dot at the center of the crosshairs, and a Range Estimating and Drop Compensation Reticle. Each reticle mode has multiple brightness settings and is set by the Illumination switch on the left side of the sight.

  • CQB – 1X Magnification with a 6 MOA illuminated red dot
  • Long Range Red Dot – 4X Magnification with a 1.5 MOA illuminated red dot
  • Long Range Crosshair – 4X Magnification with an illuminated ballistically compensated and ranging reticle
  • DFOV156-C1 & T1 reticles: SpecterDR 1.5x/6x: (5.56x45mm) is calibrated with NATO M855 (62gr) on a 20” Barrel
Magnification 6x / 1.5x
Length 183mm nominal
Width 75mm nominal
Height 73mm nominal
Weight 705g nominal
Reticle Dual-thickness ballistic crosshair with user-selectable red dot and VSOR rangefinder
Aiming Dot diameter 1.5 MoA @ 6x, 6 MoA @ 1.5x
CQB offset <44mm @ 60m
Field of View 16 deg @ 1.5x, 4 deg @ 6x
FoV @ 6x 7 m @ 100 m (21 ft @ 100 yds)
FoV @ 1.5x 28.7 m @ 100 m (86 ft @ 100 yds)
Illumination source Battery-powered LED
Crosshair illumination 5 settings, AN/PVS-22 night vision compatible
Red Dot illumination 5 settings, AN/PVS-22 night vision compatible
Eye Relief 70 mm
Entrance pupil 42mm
Exit pupil 7mm
Nominal focus 300m @ 6x, 105m @ 1.5x
Fixed focus range 20m to infinity
Battery type CR2032 (3v Lithium)
Battery life 382hrs on max RD/reticle setting, 1730hrs on second highest RD setting, 1208 hrs on second highest reticle setting
Exterior finish Flat Dark Earth
Adjustment resolution 0.5 minute of angle
Adjustment range 120 minutes of angle
Base requirement Mil-Std-1913 ?Picatinny Rail? (Weaver compatible)
Attachment ARMS Levers
Shockproof: 450 g?s
Available accessorys ARD (Anti-Reflection Device) Flip Covers
Magnification 6x / 1.5x
Length 183mm nominal
Width 75mm nominal
Height 73mm nominal
Weight 705g nominal
Reticle Dual-thickness ballistic crosshair with user-selectable red dot and VSOR rangefinder
Aiming Dot diameter 1.5 MoA @ 6x, 6 MoA @ 1.5x
CQB offset <44mm @ 60m
Field of View 16 deg @ 1.5x, 4 deg @ 6x
FoV @ 6x 7 m @ 100 m (21 ft @ 100 yds)
FoV @ 1.5x 28.7 m @ 100 m (86 ft @ 100 yds)
Illumination source Battery-powered LED
Crosshair illumination 5 settings, AN/PVS-22 night vision compatible
Red Dot illumination 5 settings, AN/PVS-22 night vision compatible
Eye Relief 70 mm
Entrance pupil 42mm
Exit pupil 7mm
Nominal focus 300m @ 6x, 105m @ 1.5x
Fixed focus range 20m to infinity
Battery type CR2032 (3v Lithium)
Battery life 382hrs on max RD/reticle setting, 1730hrs on second highest RD setting, 1208 hrs on second highest reticle setting
Exterior finish Flat Dark Earth
Adjustment resolution 0.5 minute of angle
Adjustment range 120 minutes of angle
Base requirement Mil-Std-1913 ?Picatinny Rail? (Weaver compatible)
Attachment ARMS Levers
Shockproof: 450 g?s
Available accessorys ARD (Anti-Reflection Device) Flip Covers

The ELCAN SpecterDR 1.5x/6x is the second evolution in the family of Dual Role Optical Sights. Based upon the battle-proven SpecterDR design, the SpecterDR 1.5x/6x provides higher magnification to enable greater precision and longer engagement ranges, while at the same time providing exceptional field of view in CQB mode.

The SpecterDR 1.5x/6x enjoys ELCAN’s famous crystal-clear optics as well as a generous eye relief, making it the ideal instrument for designated marksman rifles and other long range applications. As with all SpecterDR sights, the magnification and field of view can be changed instantly with the throw of a lever. Depending upon the situation, the user may adjust the sight to illuminate the crosshair or just a brilliant red dot in the center. Because the reticles are etched in glass, they are plainly visible even in the case of loss of electrical power due to battery failure or EMP.

Adjustable A.R.M.S. Levers

Standard integral A.R.M.S. and adjustable A.R.M.S. levers 

The New MK-II Lever® features a built-in precision adjustment wheel allowing finger tip (no tool) selection to desired tension to fit variations in 1913 Mil-Std Dimensions.  The mounts adjustment wheel comes pre-gauged and locked to the center of the Mil-Std dovetail specs.  The hash marks to the left or right of the adjustment wheels white marked indicator line, represent .002

XOPTEK™ Micro Reflex Sight

The XOPTEK™ Micro Reflex Sight is an included option on your SpecterDR 1x/4x. The XOPTEK™ Micro Reflex Sight is designed as a lightweight rapid aiming device for pistols and carbines and as an auxiliary sight for long-range magnified optical sights. In operation, the sight projects a brilliantly illuminated red dot into the user's field of view to act as a precise aiming point for close to mid-range targets.

The SpecterDR family offers the best single solution for Long Range and CQB engagements and is designed to withstand the rigors of modern professional use.

Reticle 5.56 (CX5455)

The Specter DR provides two reticle modes: A Red Dot at the center of the crosshairs, and a Range Estimating and Drop Compensation Reticle. Each reticle mode has multiple brightness settings and is set by the Illumination switch on the left side of the sight.

  • CQB – 1X Magnification with a 6 MOA illuminated red dot
  • Long Range Red Dot – 4X Magnification with a 1.5 MOA illuminated red dot
  • Long Range Crosshair – 4X Magnification with an illuminated ballistically compensated and ranging reticle
  • DFOV156-C1 & T1 reticles: SpecterDR 1.5x/6x: (5.56x45mm) is calibrated with NATO M855 (62gr) on a 20” Barrel
footer image footer image
Currently there are no reviews for this product. Be the first to add a review
Write Your Own Review
Currently there are no Q&As for this product Be the first to ask a question

Loading, please wait...