Discover Incredible Savings Without Compromising On Quality
Bering Optics Rubicon Pro Waterproof Reflex sight with a front control button MKP
Pulsar Thermion 2 LRF XP50 PRO Thermal Imaging Riflescopes MKP
Pulsar Thermion Duo DXP50 Multispectral Thermal Riflescope MKP
Pulsar Thermion Duo DXP55 Multispectral Thermal Riflescopes MKP
Pulsar Merger LRF XL 50 Thermal Imaging Rangefinding Binoculars MKP
FLIR LS32 19mm Thermal Monocular 7.5HZ Exportable
- Open Box
- 90-day warranty
The Flir LS32 compact handheld thermal night vision monocular has a 7.5hz refresh rate, 336x256 pixel detector, and a maximum range of 600 yards. The FLIR LS32 was built on Flir's smallest chassis, uses a USB-charging internal lithium-ion battery, and has a four-button operation. The FLIR LS32 thermal imaging monocular features an auto-focusing display, 2x digital zoom, and internal targeting laser to indicate heat without thermal devices. Military standard white-hot and black-hot displays are included as well as 4 levels of Instalert™ polarity which colors subjects above a certain temperature bright red.
The FLIR LS32 Thermal Night Vision Monocular with 2x Lens (NTSC 7.5 Hz) is designed specifically for law enforcement. Hardened for law enforcement and surveillance, the FLIR LS32 is tough enough for constant use on-duty. Don't rush on the scene with a flashlight that instantly gives away your position and only illuminates your immediate area - the FLIR LS32 thermal imaging monocular gives you a stealthy low profile alternative that is just as portable and exponentially more effective.
For years, law enforcement agencies around the world have been using the predecessors of the FLIR LS32 thermal imaging monocular for surveillance, pursuit, capture and evidence gathering. All of FLIR's considerable experience in law enforcement and military applications culminates in the FLIR LS32 2x thermal monocular. No matter how clever a suspect may be, they can't hide their heat.
A thermal imager lets officers see in pitch black conditions where traditional night vision fails. You can see through smoke, dust and light fog. Even light foliage and camouflage are powerless against thermal imaging. At only 12 ounces and 7 inches long, the FLIR LS32 2x thermal imager is destined become an essential tactical advantage. You'll be just as successful using FLIR LS32 Thermal Night Scope during the day as you will at night. For similar performance consider the FLIR CS16 thermal monocular.
Box contents:
- FLIR LS32 Thermal Night Vision Monocular
- USB AC Adapter
- Wrist Strap
- USB Cable
- Soft Drawstring Bag
- Product CD
FLIR LS32 19mm Thermal Monocular 7.5HZ Exportable
- Open Box
- 90-day warranty
| Images |  |
|
| Model | LS32 | LS64 |
| Detector Type | 336 × 256 VOx Microbolometer | 640 x 512 VOx Microbolometer |
| Focal Length | 19 mm Fixed Focus | 35 mm Fixed Focus |
| Field of View (H × W) | 17° × 13° | 18° × 14° |
| Digital E-Zoom | 2× | 4× |
| Start-up | < 2 Seconds | |
| USB Port | Charging/Software Updates/Upgrades | |
| IMAGE PRESENTATION | ||
| Image Optimization | FLIR Proprietary Digital Detail Enhancement | |
| Image Optimization | Refresh Rate | |
| Polarity | White Hot, Black Hot, InstAlert ™ | |
| LASER | White Hot, Black | |
| Type XX | Boresight +/_ XX inches @ xx feet/yards | |
| PHYSICAL | ||
| Weight (with battery) | 12.9 oz (365 g) | |
| Size (L × W × H) | 6.70” x 2.31” x 2.44” (172 × 58.7 × 62 mm) | |
| Standard Warranty | 2 Year Parts & Labor, 10 Year Detector | |
| POWER | ||
| Battery Type | Internal Battery/Li-Ion | |
| Battery Recharging | USB Cable for Internal Battery; AC Adapter; Optional Charging Cradle | |
| Battery Life (Thermal Imager Only) |
5+ Hours Typical* | |
| ENVIRONMENTAL | ||
| Rating | IP-67 (submersible) | |
| Operating Temp. | -4°F to 122°F (-20°C to +50°C) | |
| Handheld Package Includes: |
LS-Series Thermal Handheld Camera, USB Cable, USB AC Adapter, Wrist Strap, Soft Drawstring Bag, Product CD |
|
| Optional Accessories | Charging Cradle, MOLLE-Compatible Belt Pouch | |
| RANGE PERFORMANCE | ||
| Detect Man-Sized Target (1.8 m × 0.5 m) |
~600 yds (~548 m) | ~1200 yds (~1.09 km) |
FLIR LS32 19mm Thermal Monocular 7.5HZ Exportable
- Open Box
- 90-day warranty
Please note that the retail box may be scratched or bent. If you need this unit for a gift please confirm with our sales team.
- Palm-Sized Portability
- Light Weight - Only 12 Ounces
- Rugged, Weathertight, Ergonomic Design
- Multiple Resolution Choices for Increased Detection Range
- Up to 4x Digital e-Zoom
- White Hot, Black Hot and InstAlert Palettes
- 4-Button Operation: Power, Polarity, Zoom and LCD Brightness/Laser Activation
- Export of this product outside of the United States of America is not allowed and is controlled by the US Department of State
Thermal Imaging
Please note that most thermal devices are built per order. It may take 3-5 days or more for your order to ship. If timely shipping is important to you, please, contact us to verify availability prior to ordering.
Thermal devices can produce various types of images. Some are color others are monochrome. In either case change in shade or color indicates temperature differences.
Here is how thermal imaging devices work...
A special lens focuses the infrared light emitted by all of the objects in view.
The focused light is scanned by a phased array of infrared-detector elements. The detector elements create a very detailed temperature pattern called a thermogram. It only takes about one-thirtieth of a second for the detector array to obtain the temperature information to make the thermogram. This information is obtained from several thousand points in the field of view of the detector array.
The thermogram created by the detector elements is translated into electric impulses.
The impulses are sent to a signal-processing unit, a circuit board with a dedicated chip that translates the information from the elements into data for the display.
The signal-processing unit sends the information to the display, where it appears as various colors depending on the intensity of the infrared emission. The combination of all the impulses from all of the elements creates the image.
There are a few key Manufacturers when it comes to thermal imaging.
ATN: produce such well knows devies as ThOR-HD thermal scope, BINOX-THD thermal binoculars, and OTS-HD thermal monocular.
FLIR/Armasight: the largest maker of consumer level thermal products is well knows for their full product line. Zeus thermal scopes, Q14 and Scout monoculars, Helios and Scout binoculars and many more.
Pulsar: a very popular brand for digital night vision and thermal imaging. Key products include Pulsar Trail and Apex thermal scopes and Pulsar Helion and Quantum thermal monoculars.
Seek: mobile device mounted thermal cameras are the main products of this brand.
Delivery Time and Manufacturing Process for FLIR LS32 19mm Thermal Monocular 7.5HZ Exportable:
Most of our manufacturers do not keep products like FLIR LS32 19mm Thermal Monocular 7.5HZ Exportable assembled on the shelf. Night Vision tubes are kept separate from the body of the unit. When the order is placed, the manufacturer starts the order processing and assembly process which includes the following:
- Order processing - we collect all the necessary information including address and phone numbers. We also make sure that our customer ordered the correct product for their needs and that the product can be exported by US law to the country of destination. In some cases a signed export compliance form is required.
- QC - in this step the manufacturer will inspect all individual parts which will be used to assemble the night vision device for any defects.
- Production & Assembly - during production, all the parts are put together. Night Vision tubes in inserted into the body of the unit and all the complex electronics for the device are connected. This process takes place in a special lab called the "clean room" as even a small speckle of dust can cause undesired optical effect.
- QA - one the night vision device is assembled, it goes through a rigorous testing process to make sure it meets all the expected specifications and all parts function as expected. For this most manufacturers have a special "dark room" designed to allow testing of the units without causing incidental damage to the night vision tube by exposure to bright light.
- Packaging - this is a key process as well. In most case your night vision device will be shipped to you directly from the manufacturer but sometimes needs to be sent to us first. In either case items need to be packaged securely to avoid any kind of damage during transportation.
- Shipping - as described above items will most of the time ship from the manufacturer. For most domestic orders (unless shipping to POB or AFB) a premium shipper like FedEx or UPS will be used.
Only by following the above steps can we along with our manufacturers bring you - our customer - night vision products of highest quality, However as you can understand the above process can take several days to complete. For example if your device fails QA, the entire process restarts. Also at QC stage a manufacturer may realize that the tube they have in stock has a defect and a replacement tube needs to be ordered. Due to the complexity of this process, it is prudent to expect 3-4 business days for production and handling of the purchased device. Keep in mind that this process is designed to guarantee your satisfaction with the night vision device of your choice. It occasionally possible to expedite the process for urgent orders but addional fees or other restrictions may apply.
