The Armasight CO-LR-FLAG is a clip on night vision scope that is easy to learn how to use, and easy to implement - even when you have little time or preparation. If you are simply looking for a quality night vision scope that will mount over your already existing daytime scope, consider what Armasight’s CO-LR series can do for you. You are currently looking at the FLAG model, which offers Filmless Auto-Gated IIT (comparable to Generation 4) as well as manual gain control.

It is the lightweight, rugged and durable design of the cutting edge Armasight CO-LR-FLAG that has made it such a treasure amongst everyone from amateur hunters to professional law enforcement agents all the same.

Frequently you need a scope that easily clips on without the need to re-zero your scope, if you in a hurry. The Armasight CO-LR-FLAG is perfect for your needs because it can easily be attached to the front of your current rig and used immediately. This kind of simplicity is what our customers have come to expect when buying Armasight technology, and the Armasight CO-LR-FLAG is no exception.

This model also offers manual gain control, in addition to a host of other functionality.

Some technical aspects of this particular model include a Generation FLAG image intensifier, offering 62/72 lp/mm resolution. This is a very high quality image, especially considering the Armasight CO-LR-FLAG’s exceptionally low price point. Regardless of your specific needs, if you are looking for an exceptional piece of night vision technology and you need a scope that can clip on mount over a day time scope this is the perfect tool for you. It offers a detachable long range infra red illuminator, making extremely dark situations easily handleable.

Remember, when attaching this model or any of the other CO-LR models, they will be able to follow with the zoom of the daytime scope - as much as 12x. It is built with standard 1x magnification. This lightweight scope is also waterproof and built to Mil STD standards. CO-LR night vision clipon weights a mere two pounds.

Each Armasight CO-LR Night Vision Clipon ships with these accessories:

AWReC (Advanced Wireless Remote Control) #94
Battery adapter 1x CR123A 3V / 1x 2AA 1,5V
Instruction Manual with Warranty Card
XLR-IR850 Detachable Long Range Infrared illuminator/ 1x CR123A 3V
Lens Cap
Lens Tissue
Light-Suppressor
One Lithium Battery CR123A
Packing Box
Picatinny adapter for AWReC (Advanced Wireless Remote Control)
Soft carrying Case

As with all our Night Vision and Thermal Imaging devices, Night Vision Guys offers competitive pricing on the best devices. The high quality of these devices guarantees that they will meet your expectations and serve you well. Buying these units from NightVisionGuys.com guarantees quick handling as well as excellent service and price.

IIT Generation	Flag Manual Gain
Resolution	64-72 lp/mm
Magnification	1x (recommended to use with up to 10x day time optics)
Photocathode Type	Filmless GaAs
Battery Life	40 Hrs 3V / 25 Hrs 1.5V
Lens System	F1:1.54, 108 mm
FOV	9°
Range of Focus	10 to infinity
Diopter Adjustment	No
Controls	Direct
Infrared Illuminator	Detachable Long Range IR Illuminator
Low Battery Indicator	Yes
Power Supply	1 x 1.5V AA type battery or 1 x 3V CR123A type battery
Environmental Rating	Waterproof and weatherproof
Operating Temperature	-40°C to +50 °C
Storage Temperature	-50°C to +50 °C
Dimensions	235 x 97x 80 / 9.25 x 3.8 x 3.14 (LxWxH; mm/in)
Weight	0.91 / 2 (kg/lbs)
Warranty	2 Years

Simple and quick conversion of daytime scope to night vision; Mounts in front of any daytime scope with no rezeroing required; Powered by a single alkaline 1.5V AA or 3V CR123A lithium battery and equipped with wireless remote control and quick release mount; Features low battery indicator and bright light indicator with automatic brightness control system and bright light cut off system; Mil standard compliant

Gen 4 Night Vision

Please note that most high end night vision devices are built per order. It may take 3-5 days or more for your order to ship. If timely shipping is important to you, please, contact us to verify availability prior to ordering.

Generation 4 IIT is equivalent to FLAG Filmless Autogated IIT.

Gated/Filmless technology represents the biggest technological breakthrough in image intensification of the past 10 years. By removing the ion barrier film and “Gating” the system Gen 4 demonstrates substantial increases in target detection range and resolution, particularly at extremely low light levels. The use of film less technology and auto-gated power supply in 4th generation image intensifiers result in: Up to 100% improvement in photo response. Superb performance in extremely low light level (better S/N and EBI). At least triple high light level resolution (a minimum of 36 lp/mm compared to 12 lp/mm).

4th GEN. GATED/FILMLESS IIT Autogated / Filmless inverting image intensifier tubes improve night operational effectiveness for users of night vision goggles and other night vision devices. The filmless micro channel plate provides a higher signal-tonoise ratio than standard 3rd Gen. IITs, resulting in better image quality under low-light conditions. An Autogated power supply further improves image resolution under high light conditions and a reduced halo effect that minimizes interference from bright light sources. The reduced Halo maximizes the effectiveness of the Night Vision device in dynamic lighting conditions such as those experienced, for example, in night operations in urban areas.

4th Gen. IIT Features:

• Photo Cathode type: Filmless GaAs
• Resolution from 64 to 72 lp/mm
• Signal-to-Noise Ratio from 25 to 30
• Autogated power Supply
• 10,000-hour tube life

Delivery Time and Manufacturing Process for Armasight CO-LR-FLAG MG Night Vision Long Range Clip-On System with Manual Gain control:

Most of our manufacturers do not keep products like Armasight CO-LR-FLAG MG Night Vision Long Range Clip-On System with Manual Gain control assembled on the shelf. Night Vision tubes are kept separate from the body of the unit. When the order is placed, the manufacturer starts the order processing and assembly process which includes the following:

Order processing - we collect all the necessary information including address and phone numbers. We also make sure that our customer ordered the correct product for their needs and that the product can be exported by US law to the country of destination. In some cases a signed export compliance form is required.
QC - in this step the manufacturer will inspect all individual parts which will be used to assemble the night vision device for any defects.
Production & Assembly - during production, all the parts are put together. Night Vision tubes in inserted into the body of the unit and all the complex electronics for the device are connected. This process takes place in a special lab called the "clean room" as even a small speckle of dust can cause undesired optical effect.
QA - one the night vision device is assembled, it goes through a rigorous testing process to make sure it meets all the expected specifications and all parts function as expected. For this most manufacturers have a special "dark room" designed to allow testing of the units without causing incidental damage to the night vision tube by exposure to bright light.
Packaging - this is a key process as well. In most case your night vision device will be shipped to you directly from the manufacturer but sometimes needs to be sent to us first. In either case items need to be packaged securely to avoid any kind of damage during transportation.
Shipping - as described above items will most of the time ship from the manufacturer. For most domestic orders (unless shipping to POB or AFB) a premium shipper like FedEx or UPS will be used.

Only by following the above steps can we along with our manufacturers bring you - our customer - night vision products of highest quality, However as you can understand the above process can take several days to complete. For example if your device fails QA, the entire process restarts. Also at QC stage a manufacturer may realize that the tube they have in stock has a defect and a replacement tube needs to be ordered. Due to the complexity of this process, it is prudent to expect 3-4 business days for production and handling of the purchased device. Keep in mind that this process is designed to guarantee your satisfaction with the night vision device of your choice. It occasionally possible to expedite the process for urgent orders but addional fees or other restrictions may apply.