Armasight CO-LR-LRF 2HD MG Night Vision Long Range Clip-on
Discover Incredible Savings Without Compromising On Quality
Bering Optics Rubicon Pro Waterproof Reflex sight with a front control button MKP
Pulsar Thermion 2 LRF XP50 PRO Thermal Imaging Riflescopes MKP
Pulsar Thermion Duo DXP50 Multispectral Thermal Riflescope MKP
Pulsar Thermion Duo DXP55 Multispectral Thermal Riflescopes MKP
Pulsar Merger LRF XL 50 Thermal Imaging Rangefinding Binoculars MKP
From Night Vision Guys about Armasight CO-X Gen 2 SDi Exportable Night Vision Clip-on with Manual Gain
Armasight has the widest selection of night vision clipons out of all night vision manufacturers on the US market. With CO-X, CO-mini, CO-MR and CO-LR lines covering every range and day scope pairing scenario a hunter or professional sharpshooter may have interest in. CO-X Gen 2 SDi is a base model in the line up and is certified as exportable. This means that it is allowed to take CO-X SDi out of the United States but it may not be legal to import it into certain countries. You should contact appropriate authorities to confirm legality of this device before traveling with it or shipping it to an international destination.
Note that CO-X can be attached to non weapon related day time optics as well. It pairs really well with binoculars and spotting scopes alike. You do need to make sure that magnification of the day time device does not accede recommended amount.
From Armasight about CO-X Night Vision Clip-on Line
The Armasight CO-X Night Vision Clip-On System is one of the most advanced Night Vision Clip-On systems for mid-range night shooting, and stands out from the competition when it comes to clarity, versatility, reliability, function and value. The CO-X Night Vision Clip-On System converts your existing day scope into a night vision device and provides excellent target acquisition and aiming capabilities for the demanding sports shooter, hunter, military, law enforcement, and security personnel. Engineered using the latest advancements in Night Vision technology, the CO-X Clip-On System eliminates the traditional requirement of removing your existing day scope from your rifle to replace it with a dedicated night vision sight (which would also involve re-zeroing). The CO-X simply mounts in front of your existing day scope. Because the CO-X Clip-On System is factory bore-sighted to tolerances of less than 1 MOA, no rezeroing is required. The Clip-On System allows the user to maintain consistent positioning and shooting accuracy, all while maintaining the use of a fully familiar day scope. A wireless remote control unit can be placed anywhere on the user’s weapon, allowing quick and easy activation of the CO-X Clip-On System. Recommended for use with day scopes of up to 6X-7X magnification, the CO-X is equipped with a locking quick-disconnect mounting system that provides the user with an simple and fast way to attach or detach the CO-X on any standard Weaver or Picatinny rail. The CO-X Night Vision Clip-On System can be equipped with high-performance Gen 2+ image intensifier tubes using Green phosphor or “Quick Silver” and “Ghost” image intensifier tubes which provide users with natural B&W night vision displays.
Included Accessories for Armasight CO-X Night Vision Clipons
- Packing Box
- Light Suppressor for Day Scope
- Light Suppressor 1
- Light Suppressor 2
- Light Suppressor 3
- Lens Tissue
- Soft carrying Case
- Two Lithium Battery CR123A
- Instruction Manual with Warranty Card
- Quick Release Mount
- AWReC (Advanced Wireless Remote Control) #94
- Picatinny adaptor for AWReC (Advanced Wireless Remote Control)
- Mount for IR illuminator #60
- Special Wrench
- IR850 Detachable Long Range Infrared Illuminator
| IIT Generation | Gen 2+ SDI MG |
|---|---|
| Magnification | Unity (1X) |
| Lens system | F1:1.44, 80mm |
| Field of view | 12° |
| Focus Range | 10 m to infinity |
| Exit Pupil | 21 mm |
| Remote Control | Wireless |
| Manual Gain Control | Yes |
| Bright Light Cut-off | Yes |
| Automatic Shut-off System | Yes |
| Low Battery Indicator | Yes |
| Infrared Illuminator | Detachable Long Range IR Illuminator |
| Power Supply | CR123 Lithium 3V (1), or AA Alkaline 1.5V (1), or any AA or CR123 type rechargeable batteries with voltage from 1.2V to 3.7V (1) |
| Battery life | 60 hr (3V) / 30 hr (1.5V) |
| Illumination Required | Natural night illumination (overcast starlight to moonlight) |
| Environmental Rating | Waterproof |
| MIL-STD-810 | Yes |
| Operating temperature | -40 to +50 °С (-40 to 122 °F) |
| Storage Temperature | -50 to +50 °С (-58 to 122 °F) |
| Overall Dimensions | 152×100×85 mm (5.9×3.9×3.3 in) |
| Weight (without Mount and Remote Control) | 0.71 kg (1.56 lbs) |
| Warranty | 2 years |
Armasight CO-X Gen 2+ SDi MG Night Vision Clip-On System
- Converts your day scope, sight, or binoculars into night vision device
- Mounts in front of any day scope with no re-zeroing required
- Available in a variety of high performing Gen 2+ image intensifier tube options
- Wireless remote control
- Automatic brightness control
- Manual gain control for the best possible image contrast in both high and low light condi- tions (CO-X MG model)
- Powered by a single AA or CR123A battery
- Bright light cut-off system
- Bright light cut-off and battery condition indications
- Filled with dry nitrogen to prevent internal fogging
- Mounts on Picatinny/ Weaver rail with a quick release mount
- Mounts on the lenses of specified day scopes with the optional adapters
- Long-range IR850 illuminator
- Mil Standard compliant
- Limited two-year warranty
Gen 2 Night Vision
Please note that most high end night vision devices are built per order. It may take 3-5 days or more for your order to ship. If timely shipping is important to you, please, contact us to verify availability prior to ordering.
2nd generation is primarily used by law enforcement or for professional applications. This is because the cost of a 2nd Gen. unit is approximately $500.00 to $1000.00 more then a 1st Gen. The main difference between a 1st and a 2nd generation unit is the addition of a micro-channel plate, commonly referred to as a MCP. The MCP works as an electron amplifier and is placed directly behind the photocathode. The MCP consists of millions of short parallel glass tubes. When the electrons pass through these short tubes, thousands more electrons are released. This extra process allows 2nd generation units to amplify the light many more times then 1st generation giving you a brighter and sharper image. 2nd Gen. IIT standard 2nd generation tubes are high quality with exceptional brightness and resolution. Each tube has a micro channel plate, multi-alkaline photocathode with built-in power supply.
2nd Gen. IIT Features:
• Photo Cathode type: Multi-Alkali
• Resolution from 40 to 45 lp/mm
• Signal-to-Noise Ratio from 12 to 20
• 5,000+ hour tube life
Delivery Time and Manufacturing Process for Armasight CO-X Gen 2+ SDi MG Exportable Night Vision Clip-On System:
Most of our manufacturers do not keep products like Armasight CO-X Gen 2+ SDi MG Exportable Night Vision Clip-On System assembled on the shelf. Night Vision tubes are kept separate from the body of the unit. When the order is placed, the manufacturer starts the order processing and assembly process which includes the following:
- Order processing - we collect all the necessary information including address and phone numbers. We also make sure that our customer ordered the correct product for their needs and that the product can be exported by US law to the country of destination. In some cases a signed export compliance form is required.
- QC - in this step the manufacturer will inspect all individual parts which will be used to assemble the night vision device for any defects.
- Production & Assembly - during production, all the parts are put together. Night Vision tubes in inserted into the body of the unit and all the complex electronics for the device are connected. This process takes place in a special lab called the "clean room" as even a small speckle of dust can cause undesired optical effect.
- QA - one the night vision device is assembled, it goes through a rigorous testing process to make sure it meets all the expected specifications and all parts function as expected. For this most manufacturers have a special "dark room" designed to allow testing of the units without causing incidental damage to the night vision tube by exposure to bright light.
- Packaging - this is a key process as well. In most case your night vision device will be shipped to you directly from the manufacturer but sometimes needs to be sent to us first. In either case items need to be packaged securely to avoid any kind of damage during transportation.
- Shipping - as described above items will most of the time ship from the manufacturer. For most domestic orders (unless shipping to POB or AFB) a premium shipper like FedEx or UPS will be used.
Only by following the above steps can we along with our manufacturers bring you - our customer - night vision products of highest quality, However as you can understand the above process can take several days to complete. For example if your device fails QA, the entire process restarts. Also at QC stage a manufacturer may realize that the tube they have in stock has a defect and a replacement tube needs to be ordered. Due to the complexity of this process, it is prudent to expect 3-4 business days for production and handling of the purchased device. Keep in mind that this process is designed to guarantee your satisfaction with the night vision device of your choice. It occasionally possible to expedite the process for urgent orders but addional fees or other restrictions may apply.
