New for 2014, another great night vision device from ATN. ATN PS28 replaces the well acclaimed PS22 model.
New design and enhanced performance make this device even better. With the supplied quick release mount, automatic brightness adjustment, and low weight this night vision clipon delivers fantastic results.
Thanks to the many included adapters and optional scope mounting brackets, ATN PS28-3 (NVDNPS2830) can be matched up with practically any day time scope. The way this works is that the ATN PS28-3 night vision clipon attaches in the from of the day time scope. It can either attach on the rail or directly onto the scope by means of an option scope mounting bracket. As a result, you never have to re-zero your day time scope. The entire process takes seconds and you are ready to shoot at night thanks to the ATN PS28-3 night vision clipon.
ATN PS28 Night Vision Clipon can be purchased with various night vision tubes ranging from a standard Gen 2 and all the way to Gen 4. Though not ideal for that purpose PS28-3 can serve as a handheld monocular when you need to quickly survey the surroundings.
If you are a hunter, law enforcement professional, farmer protecting their property or simply enjoy night time shooting, this device is ideal for you. It works especially well on tactical rifles with weaver rails and matches up well with most day time scopes including Trijicon, Leupold, Nikon, Bushnell and others.
As always please feel free to contact us if you have any questions or if you found a better price on another site. If such an unlikely even occurs, we will certainly match surpass any discount on ATN products and ATN PS28-3 night vision clipon in particular.
Another great use for ATN PS28-3 night vision clipon is on a photo camera or a spotting scope. Once again, feel free to contact us for some creative night vision solutions..
ATN PS28 Night Vision Day/Night system ships with these accessories:
Total Darkness IR System | Yes |
IIT Generation | 3 |
Resolution | 64 lp/mm |
Signal to Noise Ratio | 22 Typical |
Figure of Merit | 1600 Typical |
MTTF - Mean Time Before Failure | 10,000 hours |
Magnification | 1x |
Lens System | |
Proshield Lens Coating | |
FOV | |
Range of Focus | |
Diopter Adjustment | No |
Controls | Direct |
Automatic Brightness Control | Yes |
Bright Light Cut-off | Yes |
Infrared Illuminator | Detachable |
IR Indicator | No |
Low Battery Indicator | No |
Power Supply | 1 x 3V(CR123A) |
Battery Life | 50 hrs |
Environmental Rating | Waterproof |
Operating Temperature | -40°F to +122°F -40°C to +50°C |
Storage Temperature | -58°F to +158°F -50 to +70 °C |
Dimensions | |
Weight | |
Warranty | 2 years |
- No need to rezero your scope
- Easily changes daytime scope to Night Vision
- Waterproof
- Lightweight and rugged
- Fast catadioptric front lens system
- Mounts in front of daytime scope, no re-zeroing required
- Automatic Brightness Control
- Resistance to severe conditions
- Comes with Quick Release Mount
Gen 3 Night Vision
Please note that most high end night vision devices are built per order. It may take 3-5 days or more for your order to ship. If timely shipping is important to you, please, contact us to verify availability prior to ordering.
By adding a sensitive chemical, gallium arsenide to the photocathode a brighter and sharper image has been achieved over 2nd generation units. An ion barrier film was also added to increase tube life. 3rd Gen. provides the user with good to excellent low light performance. 3rd Gen. Standard IIT Our standard 3rd generation image intensifier tubes are of the highest quality. They have a micro channel plate, GaAs photocathode, and a completely self-contained integral high-voltage power supply. These 3rd Generation tubes provide a combined increase in resolution, signal to noise and photosensitivity over tubes with a multi-alkali photocathode. Generation 3 is the standard for the USA military.
3rd Gen. Standard IIT Features:
• Photo Cathode type: Gallium Arsenide
• Resolution 64 lp/mm
• Signal-to-Noise Ratio 22 Typical
• 10,000-hour tube life
Delivery Time and Manufacturing Process for ATN PS28-3 Night Vision Clipon Sight:
Most of our manufacturers do not keep products like ATN PS28-3 Night Vision Clipon Sight assembled on the shelf. Night Vision tubes are kept separate from the body of the unit. When the order is placed, the manufacturer starts the order processing and assembly process which includes the following:
- Order processing - we collect all the necessary information including address and phone numbers. We also make sure that our customer ordered the correct product for their needs and that the product can be exported by US law to the country of destination. In some cases a signed export compliance form is required.
- QC - in this step the manufacturer will inspect all individual parts which will be used to assemble the night vision device for any defects.
- Production & Assembly - during production, all the parts are put together. Night Vision tubes in inserted into the body of the unit and all the complex electronics for the device are connected. This process takes place in a special lab called the "clean room" as even a small speckle of dust can cause undesired optical effect.
- QA - one the night vision device is assembled, it goes through a rigorous testing process to make sure it meets all the expected specifications and all parts function as expected. For this most manufacturers have a special "dark room" designed to allow testing of the units without causing incidental damage to the night vision tube by exposure to bright light.
- Packaging - this is a key process as well. In most case your night vision device will be shipped to you directly from the manufacturer but sometimes needs to be sent to us first. In either case items need to be packaged securely to avoid any kind of damage during transportation.
- Shipping - as described above items will most of the time ship from the manufacturer. For most domestic orders (unless shipping to POB or AFB) a premium shipper like FedEx or UPS will be used.
Only by following the above steps can we along with our manufacturers bring you - our customer - night vision products of highest quality, However as you can understand the above process can take several days to complete. For example if your device fails QA, the entire process restarts. Also at QC stage a manufacturer may realize that the tube they have in stock has a defect and a replacement tube needs to be ordered. Due to the complexity of this process, it is prudent to expect 3-4 business days for production and handling of the purchased device. Keep in mind that this process is designed to guarantee your satisfaction with the night vision device of your choice. It occasionally possible to expedite the process for urgent orders but addional fees or other restrictions may apply.
From Our Community
Question
Hi I am living in a shit country South Africa my question is how can I get the ATN PS28 WP into this country is there a way
From Johan Ernst on Nov 11, 2014
Answer
Hi Johan. You can purchase the exportable version located herehttp://www.nightvisionguys.com/atn-ps28-wpti-night-vision-clipon-sight. But ATN is currently out of stock on these units for about 3-4 weeks. There are are several Armasight clip on units which might work for you. Like CO-MR for example.
Question
: How high is the center of the ps28 when clamped on a picatinny rail? This would be from the top of the rail.
From Bill on Jan 31, 2017
Answer
Hi Bill. I do not have the exact number for PS28 night vision clipon. You may want to contact ATN directly for this. The lens is 40mm and the axis will be around 33-36mm not sure exactly. They say in the user manual that the dayscope and PS28 should be no more than 3mm off at their centers.
Question
What is the difference between the atn ps28-3 and the atn ps28-3p?
From jordan on May 16, 2018
Answer
hi Jordan. PS28-3P night vision clip-on has a Gen 3 Pinnacle tube which offers military grade power adjustment technology and superb clarity. Pinnacle tubes are so advanced that they are explicitly prohibited for export as a proprietary military technology.