Discover Incredible Savings Without Compromising On Quality
Bering Optics Rubicon Pro Waterproof Reflex sight with a front control button MKP
Pulsar Thermion 2 LRF XP50 PRO Thermal Imaging Riflescopes MKP
Pulsar Thermion Duo DXP50 Multispectral Thermal Riflescope MKP
Pulsar Thermion Duo DXP55 Multispectral Thermal Riflescopes MKP
Pulsar Merger LRF XL 50 Thermal Imaging Rangefinding Binoculars MKP
The ATN Night Arrow is a powerful night vision weapon sight that can be easily mounted to any standard weaver rail. Carefully designed to have a nice matte black finish that will not be reflective (excluding the lens), it is a very low profile night vision sight and can serve a wide range of tactical functions.
The ATN Night Arrow offers Total Darkness Infra Red, making it easy to switch to Infra Red in situations where there is basically no external light to amplify. Anyone with an interest in a night vision weapon sight that can offer them a quality resolution, a rugged yet lightweight build, and the functionality that Total Darkness IR offers them should consider the ATN Night Arrow. It is available in a wide variety of magnifications and image intensifier units, depending on your personal tactical needs.
The model that you are currently looking at is the ATN Night Arrow 4-WPTI, which offers a WPTI image intensifier unit with a resolution of 45/54 lp/mm. It also offers a magnification of 4x.
The ATN Night Arrow is a strong choice in commercial night vision weapon sights, as it offers a high quality image intensifier unit, a lightweight but durable design, and is even fog and water resistant. It is designed to use a single AA battery, making it an efficient and economical choice in night vision as well.
On top of all of its other quality functionality, it also has both Automatic Brightness Control and Bright Light Cut Off. These features make it a night vision weapon sight that can be safely used in situations that may end up producing larger amounts of light. Both Automatic Brightness Control and Bright Light Cut Off are ways that your night vision weapon can adjust itself or even shut itself off if there is too much light and it could damage your night vision lens. These features will help your ATN Night Arrow’s longevity and protect it from damage.
The ATN Night Arrow ships with an operation manual, a lens tissue, a warranty card, an IR450-B4, 1.5 volt AA battery.
The ATN Night Arrow ships with a two year warranty.
As with all our Night Vision and Thermal Imaging devices, Night Vision Guys offers competitive pricing on the best devices. The high quality of these devices guarantees that they will meet your expectations and serve you well. Buying these units from NightVisionGuys.com guarantees quick handling as well as excellent service and price.
| Total Darkness IR System | Yes |
| "SMART" Technology | No |
| IIT Generation | WPTI |
| Photocathode Type | |
| Resolution | 45-54 lp/mm |
| Figure of Merit | |
| MTTF - Mean Time Before Failure | 10,000 |
| Magnification | 4x |
| Lens System | |
| Proshield Lens Coating | Yes |
| FOV | 7,5° |
| Exit Pupil | 11 mm |
| Eye Relief | 46 mm |
| Range of Focus | 10m to infinity |
| Diopter Adjustment | -4 to +6 |
| Controls | Direct |
| Remote Control | No |
| Automatic Brightness Control | Yes |
| Bright Light Cut-off | Yes |
| Infrared Illuminator | Detachable IR450 |
| IR Indicator | Yes |
| Low Battery Indicator | Yes (in FOV) |
| Power Supply | 1 x 1.5 V AA type battery |
| Battery Life | 30 hrs |
| Reticle System | Red on Green |
| Windage & Elewation Adjustment | 1/4 MOA |
| Environmental Rating | Water and fog resistant |
| MIL-STD-810 | No |
| Operating Temperature | -40 to +50 °C |
| Storage Temperature | -50 to +70 °C |
| Dimensions | 280 x 103 x 93 mm 11.0” x 4.1” x 3.7” |
| Weight | 1.4 kg / 3.1 lbs |
| Warranty | 2 years |
- Light and compact design
- Top-notch performance
- All external surfaces are a non-reflective matte black finish (except for the optical elements)
- “RED ON GREEN” reticle system with 1/6 MOA adjustment
- Automatic brightness control(ABC) for tube protection
- One-knob operation
- Illuminated center red reticle for optimal contrast against a dark or light target
- Mounts to standard weaver rails
- Night Arrow is designed to use 1 AA type battery
- Limited Two-Year Warranty
Gen WPT Night Vision
Please note that most high end night vision devices are built per order. It may take 3-5 days or more for your order to ship. If timely shipping is important to you, please, contact us to verify availability prior to ordering.
In ATNs continuing effort to supply our clients with cutting edge Night Vision solutions we are proud to introduce a new line of select units based on ATN White Phosphor Technology© (WPT™). Studies show that nighttime scenes appear remarkably more natural in black and white versus the usual green. B&W provides clearer information about contrast, shapes and shadows. ATNs White Phosphor Technology© provides users with this natural B&W night vision image. Operators that tested units that use ATN WPT™ reported a significantly better degree of detail, overall contrast, full moon similarity and range of shades. WPT™ provides more discriminating shades of intensity between white and black than between green and black resulting in better contrast and depth perception then when compared to green phosphor NVG’s. The majority of the WPT™ performance characteristics are on par or better then the latest Gallium Arsenide based image intensifier tubes. WPT™ specifications include typical resolution of 68lp/mm (with some over 74lp/mm) and Signal-to-Noise figures as high as 25. 7 out of 10 users name WPT™ as a “Night Vision Preference” when compared with common green night vision, especially in an urban environment. “No lab testing needed on WPT™ – the depth perception is phenomenal and noticeably better than what I used in the past.” – SOF Operator K. WPT™ is available now in limited quantities in a wide variety of systems such as ATN PVS14/6015 tactical monocular, ATN NVM-14 multifunctional pocket-scope/goggle, ATN Marsx4 and ATN Marsx6 medium to long range weapon sights and on the FIITS-14 where WPT™ is optically fused with thermal imaging. Designed for Special Ops WPT™ is not a toy. If your life depends on your gear and you want to improve your operational effectiveness you should check it out.
| Photo Cathode type: | Multi-Alkali |
| Image output: | Black & White image output |
| Resolution: | 60 - 74 lp/mm |
| Signal-to-Noise Ratio: | 18-26 ( 22 Typical ) |
| Tube life: | 10,000 hour |
Delivery Time and Manufacturing Process for Night Arrow 4 - WPTI Exportable Night Vision Weapon Sight:
Most of our manufacturers do not keep products like Night Arrow 4 - WPTI Exportable Night Vision Weapon Sight assembled on the shelf. Night Vision tubes are kept separate from the body of the unit. When the order is placed, the manufacturer starts the order processing and assembly process which includes the following:
- Order processing - we collect all the necessary information including address and phone numbers. We also make sure that our customer ordered the correct product for their needs and that the product can be exported by US law to the country of destination. In some cases a signed export compliance form is required.
- QC - in this step the manufacturer will inspect all individual parts which will be used to assemble the night vision device for any defects.
- Production & Assembly - during production, all the parts are put together. Night Vision tubes in inserted into the body of the unit and all the complex electronics for the device are connected. This process takes place in a special lab called the "clean room" as even a small speckle of dust can cause undesired optical effect.
- QA - one the night vision device is assembled, it goes through a rigorous testing process to make sure it meets all the expected specifications and all parts function as expected. For this most manufacturers have a special "dark room" designed to allow testing of the units without causing incidental damage to the night vision tube by exposure to bright light.
- Packaging - this is a key process as well. In most case your night vision device will be shipped to you directly from the manufacturer but sometimes needs to be sent to us first. In either case items need to be packaged securely to avoid any kind of damage during transportation.
- Shipping - as described above items will most of the time ship from the manufacturer. For most domestic orders (unless shipping to POB or AFB) a premium shipper like FedEx or UPS will be used.
Only by following the above steps can we along with our manufacturers bring you - our customer - night vision products of highest quality, However as you can understand the above process can take several days to complete. For example if your device fails QA, the entire process restarts. Also at QC stage a manufacturer may realize that the tube they have in stock has a defect and a replacement tube needs to be ordered. Due to the complexity of this process, it is prudent to expect 3-4 business days for production and handling of the purchased device. Keep in mind that this process is designed to guarantee your satisfaction with the night vision device of your choice. It occasionally possible to expedite the process for urgent orders but addional fees or other restrictions may apply.
