ATN PS28-WPT Night Vision Clipon Sight
Discover Incredible Savings Without Compromising On Quality
Bering Optics Rubicon Pro Waterproof Reflex sight with a front control button MKP
Pulsar Thermion 2 LRF XP50 PRO Thermal Imaging Riflescopes MKP
Pulsar Thermion Duo DXP50 Multispectral Thermal Riflescope MKP
Pulsar Thermion Duo DXP55 Multispectral Thermal Riflescopes MKP
Pulsar Merger LRF XL 50 Thermal Imaging Rangefinding Binoculars MKP
The ATN PS22 series are attachment scopes built to easily connect to a daytime riflescope, quickly and very efficiently. These scopes have been specifically designed to be easy and extremely fast to set up, so that you don’t have to worry about fitting your night vision scope when you are on the field. No re zeroing is necessary with these scopes, making it supremely easy and stress free to switch between your daytime riflescope and the ATN PS22. This is what sets the ATN PS22 apart from other night vision attachment scopes.
There are a wide variety of models in the ATN PS22 series. You are currently viewing the ATN PS22-WPT. There is a PS22-CGT and a PS22-HPT model available as well.
This scope comes with a Quick Release Mount, meaning that it can be removed and replaced with your regular daytime scope in under thirty seconds. This kind of turn around in scope replacement is absolutely necessary for the professional who needs to be able to use his scope all the time and doesn’t want to waste time switching between day and night vision technology. The ATN PS22 is designed to be quick and easy in attachment and detachment, so you can stay focused on more important matters no matter what.
The ATN PS22 easily attaches to any scope with a magnification of 1x to 6x, though it performs best between 2.5x and 4x.
The model you are currently viewing is the ATN PS22-WPT, which offers a WPT image intensifier tube and a resolution of 45/54 lp/mm. It has a Total Darkness Infra Red System as well, meaning that even in tight corners and situations where you do not have any light to amplify, the trusty ATN PS2-WPT will not leave you high and dry. You will be able to use infra red technology to sustain visibility. This technology is priceless in a night vision scope, especially an attachable one.
The ATN PS22-WPT also has an f/1.44 lens system. It also brags Automatic Brightness Control as well as a Bright Light Cut Off, these add functionality that make it easy to keep your lens in good condition and make sure that you get a long life out of your night vision attachable scope. The night scope is waterproof, as well.
The ATN PS22-WPT offers 60 hours of battery life and weighs 1.4 pounds.
It comes with a two year warranty.
As with all our Night Vision and Thermal Imaging devices, Night Vision Guys offers competitive pricing on the best devices. The high quality of these devices guarantees that they will meet your expectations and serve you well. Buying these units from NightVisionGuys.com guarantees quick handling as well as excellent service and price.
| Total Darkness IR System | Yes |
| "SMART" Technology | No |
| IIT Generation | WPT |
| Magnification | 1x |
| Photocathode Type | Multi - Alkali |
| Resolution | 45-54 lp/mm |
| Signal to Noise Ratio | 16-24 |
| Figure of Merit | 1600 Typical |
| MTTF - Mean Time Before Failure | 10,000 hours |
| Lens System | F1.44, 80 mm |
| Proshield Lens Coating | Yes |
| FOV | 13° |
| Exit Pupil | 21 mm |
| Range of Focus | 10 m to infinity |
| Diopter Adjustment | No |
| Controls | Direct |
| Remote Control | Yes |
| Automatic Brightness Control | Yes |
| Bright Light Cut-off | Yes |
| Infrared Illuminator | Detachable IR450 |
| IR Indicator | Yes |
| Low Battery Indicator | No |
| Power Supply | 1 x 3 V CR123A type battery |
| Battery Life | 60 hrs |
| Reticle System | No |
| Windage & Elewation Adjustment | No |
| Environmental Rating | Waterproof |
| MIL-STD-810 | Yes |
| Operating Temperature | -40 to +50 °C |
| Storage Temperature | -50 to +70 °C |
| Dimensions | 150x80x72 mm 5.9"x3.2"x2.8" |
| Weight | 0.64 kg / 1.4 lbs |
| Warranty | 2 years |
ATN PS22-WPT Night Vision Clipon System
- Easily changes daytime scope to Night Vision
- Mounts in front of the daytime scope, no re-zeroing required
- Multi-coated all-glass optics
- Fast catadioptic front lens system
- Large 21 mm output window
- Lightweight and rugged
- Comes with Quick Release Mount
- Optional 7/8” weaver mount
- Optional Scope Mounting System attaches the PS22 unit to the objective of the day scope (25...62 mm diameter)
- Automatic brightness control
- Resistance to severe conditions
- Up to 60 hours of continuous operation with one Lithium battery
- Limited Two-Year Warranty
Gen WPT Night Vision
Please note that most high end night vision devices are built per order. It may take 3-5 days or more for your order to ship. If timely shipping is important to you, please, contact us to verify availability prior to ordering.
In ATNs continuing effort to supply our clients with cutting edge Night Vision solutions we are proud to introduce a new line of select units based on ATN White Phosphor Technology© (WPT™). Studies show that nighttime scenes appear remarkably more natural in black and white versus the usual green. B&W provides clearer information about contrast, shapes and shadows. ATNs White Phosphor Technology© provides users with this natural B&W night vision image. Operators that tested units that use ATN WPT™ reported a significantly better degree of detail, overall contrast, full moon similarity and range of shades. WPT™ provides more discriminating shades of intensity between white and black than between green and black resulting in better contrast and depth perception then when compared to green phosphor NVG’s. The majority of the WPT™ performance characteristics are on par or better then the latest Gallium Arsenide based image intensifier tubes. WPT™ specifications include typical resolution of 68lp/mm (with some over 74lp/mm) and Signal-to-Noise figures as high as 25. 7 out of 10 users name WPT™ as a “Night Vision Preference” when compared with common green night vision, especially in an urban environment. “No lab testing needed on WPT™ – the depth perception is phenomenal and noticeably better than what I used in the past.” – SOF Operator K. WPT™ is available now in limited quantities in a wide variety of systems such as ATN PVS14/6015 tactical monocular, ATN NVM-14 multifunctional pocket-scope/goggle, ATN Marsx4 and ATN Marsx6 medium to long range weapon sights and on the FIITS-14 where WPT™ is optically fused with thermal imaging. Designed for Special Ops WPT™ is not a toy. If your life depends on your gear and you want to improve your operational effectiveness you should check it out.
| Photo Cathode type: | Multi-Alkali |
| Image output: | Black & White image output |
| Resolution: | 60 - 74 lp/mm |
| Signal-to-Noise Ratio: | 18-26 ( 22 Typical ) |
| Tube life: | 10,000 hour |
Delivery Time and Manufacturing Process for ATN PS22-WPT Night Vision Clipon System:
Most of our manufacturers do not keep products like ATN PS22-WPT Night Vision Clipon System assembled on the shelf. Night Vision tubes are kept separate from the body of the unit. When the order is placed, the manufacturer starts the order processing and assembly process which includes the following:
- Order processing - we collect all the necessary information including address and phone numbers. We also make sure that our customer ordered the correct product for their needs and that the product can be exported by US law to the country of destination. In some cases a signed export compliance form is required.
- QC - in this step the manufacturer will inspect all individual parts which will be used to assemble the night vision device for any defects.
- Production & Assembly - during production, all the parts are put together. Night Vision tubes in inserted into the body of the unit and all the complex electronics for the device are connected. This process takes place in a special lab called the "clean room" as even a small speckle of dust can cause undesired optical effect.
- QA - one the night vision device is assembled, it goes through a rigorous testing process to make sure it meets all the expected specifications and all parts function as expected. For this most manufacturers have a special "dark room" designed to allow testing of the units without causing incidental damage to the night vision tube by exposure to bright light.
- Packaging - this is a key process as well. In most case your night vision device will be shipped to you directly from the manufacturer but sometimes needs to be sent to us first. In either case items need to be packaged securely to avoid any kind of damage during transportation.
- Shipping - as described above items will most of the time ship from the manufacturer. For most domestic orders (unless shipping to POB or AFB) a premium shipper like FedEx or UPS will be used.
Only by following the above steps can we along with our manufacturers bring you - our customer - night vision products of highest quality, However as you can understand the above process can take several days to complete. For example if your device fails QA, the entire process restarts. Also at QC stage a manufacturer may realize that the tube they have in stock has a defect and a replacement tube needs to be ordered. Due to the complexity of this process, it is prudent to expect 3-4 business days for production and handling of the purchased device. Keep in mind that this process is designed to guarantee your satisfaction with the night vision device of your choice. It occasionally possible to expedite the process for urgent orders but addional fees or other restrictions may apply.
