Night Optics Sentry 14 Gen 3 BW Gated Manual Gain Night Vision Monocular

SKU
NM-P14F3BW
This product is no longer available
Please consider this similar product instead
AGM PVS-14 3NW Night Vision Monocular Gen 3 White Phosphor

Night Optics Sentry 14 Gen 3 B/W Gated + Manual Gain Night Vision Monocular NM-P14F3BW

Currently in use by US Armed Forces, the Sentry 14 is the first choice for conducting combat operations to include dismounted terrain navigation in extremely low light conditions.

The highly versatile Sentry 14 system can be used as a hand-held or hands-free single eye goggle, or as a night vision weapon system when coupled to a daytime close quarters battle sight.

Simple user controls include a 3-position switch (OFF/ON/Momentary and constant IR). The system’s Generation 3 or Generation 2 (NO-6015 variant) image tube features Automatic Brightness Control and is protected by fully-automated sensors that shut off the unit within seconds if accidentally exposed to bright light. Sophisticated electronics turn off the Sentry 14 when removed from the head or helmet mount or when shifted into to the “UP” position.

Light weight, rugged and waterproof, the Sentry 14 is a powerful performer for use in confined as well as open spaces.

SENTRY 14 | GEN 3 WHITE PHOSPHOR GATED NIGHT VISION MONOCULAR

Night Optics USA Part # NM-P14F3BW
Magnification 1x
Lens System 26mm f1.2
Field of View
@1000 Yards
40°
2184 ft
Resolution 64-72 lp/mm
Power Supply Gated
Film Type Unfilmed
Range of Focus 10" to ∞
Detection Range 1148 ft
Recognition Range 984 ft
Diopter Adjustment +2 to -6
Weather Resistent Waterproof to 66 ft
Camera Adaptable Yes
IR Illuminator Yes
Battery Type/Life AA(1) /40 hours
Dimensions 4.5" x 2.25" x 2"
Weight 13.8 oz
Operating Temperature -60°F to 125°F
-40°C to +50°C
Warranty 2 Years
 

Night Optics Sentry 14 Gen 3 B/W Gated + Manual Gain Night Vision Monocular NM-P14F3BW

  • Filmless Technology
  • White Phosphor
  • Advanced US Gen III
  • Rugged
  • Mil Spec Optics
  • Manual Gain Control
  • Weapon Mountable
  • Lightweight
  • Internal Low-Battery
  • IR Indicators

Gen WPT Night Vision

Please note that most high end night vision devices are built per order.  It may take 3-5 days or more for your order to ship.  If timely shipping is important to you, please, contact us to verify availability prior to ordering. 

In ATNs continuing effort to supply our clients with cutting edge Night Vision solutions we are proud to introduce a new line of select units based on ATN White Phosphor Technology© (WPT™). Studies show that nighttime scenes appear remarkably more natural in black and white versus the usual green. B&W provides clearer information about contrast, shapes and shadows. ATNs White Phosphor Technology© provides users with this natural B&W night vision image. Operators that tested units that use ATN WPT™ reported a significantly better degree of detail, overall contrast, full moon similarity and range of shades. WPT™ provides more discriminating shades of intensity between white and black than between green and black resulting in better contrast and depth perception then when compared to green phosphor NVG’s. The majority of the WPT™ performance characteristics are on par or better then the latest Gallium Arsenide based image intensifier tubes. WPT™ specifications include typical resolution of 68lp/mm (with some over 74lp/mm) and Signal-to-Noise figures as high as 25. 7 out of 10 users name WPT™ as a “Night Vision Preference” when compared with common green night vision, especially in an urban environment. “No lab testing needed on WPT™ – the depth perception is phenomenal and noticeably better than what I used in the past.” – SOF Operator K. WPT™ is available now in limited quantities in a wide variety of systems such as ATN PVS14/6015 tactical monocular, ATN NVM-14 multifunctional pocket-scope/goggle, ATN Marsx4 and ATN Marsx6 medium to long range weapon sights and on the FIITS-14 where WPT™ is optically fused with thermal imaging. Designed for Special Ops WPT™ is not a toy. If your life depends on your gear and you want to improve your operational effectiveness you should check it out.

Photo Cathode type: Multi-Alkali
Image output: Black & White image output
Resolution: 60 - 74 lp/mm
Signal-to-Noise Ratio: 18-26 ( 22 Typical )
Tube life: 10,000 hour

Delivery Time and Manufacturing Process for Night Optics Sentry 14 Gen 3 BW Gated Manual Gain Night Vision Monocular:

Most of our manufacturers do not keep products like Night Optics Sentry 14 Gen 3 BW Gated Manual Gain Night Vision Monocular assembled on the shelf. Night Vision tubes are kept separate from the body of the unit. When the order is placed, the manufacturer starts the order processing and assembly process which includes the following:

  • Order processing - we collect all the necessary information including address and phone numbers. We also make sure that our customer ordered the correct product for their needs and that the product can be exported by US law to the country of destination. In some cases a signed export compliance form is required.
  • QC - in this step the manufacturer will inspect all individual parts which will be used to assemble the night vision device for any defects.
  • Production & Assembly - during production, all the parts are put together. Night Vision tubes in inserted into the body of the unit and all the complex electronics for the device are connected. This process takes place in a special lab called the "clean room" as even a small speckle of dust can cause undesired optical effect.
  • QA - one the night vision device is assembled, it goes through a rigorous testing process to make sure it meets all the expected specifications and all parts function as expected. For this most manufacturers have a special "dark room" designed to allow testing of the units without causing incidental damage to the night vision tube by exposure to bright light.
  • Packaging - this is a key process as well. In most case your night vision device will be shipped to you directly from the manufacturer but sometimes needs to be sent to us first. In either case items need to be packaged securely to avoid any kind of damage during transportation.
  • Shipping - as described above items will most of the time ship from the manufacturer. For most domestic orders (unless shipping to POB or AFB) a premium shipper like FedEx or UPS will be used.

Only by following the above steps can we along with our manufacturers bring you - our customer - night vision products of highest quality, However as you can understand the above process can take several days to complete. For example if your device fails QA, the entire process restarts. Also at QC stage a manufacturer may realize that the tube they have in stock has a defect and a replacement tube needs to be ordered. Due to the complexity of this process, it is prudent to expect 3-4 business days for production and handling of the purchased device. Keep in mind that this process is designed to guarantee your satisfaction with the night vision device of your choice.  It occasionally possible to expedite the process for urgent orders but addional fees or other restrictions may apply.

footer image footer image
Currently there are no reviews for this product. Be the first to add a review
Write Your Own Review
Ask your own question
From Our Community

Loading, please wait...