New for 2014, another great night vision device from ATN. ATN PS28 replaces the well acclaimed PS22 model.

New design and enhanced performance make this device even better. With the supplied quick release mount, automatic brightness adjustment, and low weight this night vision clipon delivers fantastic results.

Thanks to the many included adapters and optional scope mounting brackets, ATN PS28-4 (NVDNPS2830) can be matched up with practically any day time scope. The way this works is that the ATN PS28-4 night vision clipon attaches in the from of the day time scope. It can either attach on the rail or directly onto the scope by means of an option scope mounting bracket. As a result, you never have to re-zero your day time scope. The entire process takes seconds and you are ready to shoot at night thanks to the ATN PS28-4 night vision clipon.

ATN PS28 Night Vision Clipon can be purchased with various night vision tubes ranging from a standard Gen 2 and all the way to Gen 4. Though not ideal for that purpose PS28-4 can serve as a handheld monocular when you need to quickly survey the surroundings.

If you are a hunter, law enforcement professional, farmer protecting their property or simply enjoy night time shooting, this device is ideal for you. It works especially well on tactical rifles with weaver rails and matches up well with most day time scopes including Trijicon, Leupold, Nikon, Bushnell and others.

As always please feel free to contact us if you have any questions or if you found a better price on another site. If such an unlikely even occurs, we will certainly match surpass any discount on ATN products and ATN PS28-4 night vision clipon in particular.

Another great use for ATN PS28-4 night vision clipon is on a photo camera or a spotting scope. Once again, feel free to contact us for some creative night vision solutions..

ATN PS28 Night Vision Day/Night system ships with these accessories:

Instruction Manual
Lens Tissue
One Lithium Battery
Packing box
Warranty card
Mil-Spec Hard Case
IR450-B4
Quick Release Mount
Remote Control Unit

Total Darkness IR System	Yes
IIT Generation	4
Resolution	64-72 lp/mm
Signal to Noise Ratio	25-30
Figure of Merit	2000 Typical
MTTF - Mean Time Before Failure	10,000 hours
Magnification	1x
Lens System
Proshield Lens Coating
FOV
Range of Focus
Diopter Adjustment	No
Controls	Direct
Automatic Brightness Control	Yes
Bright Light Cut-off	Yes
Infrared Illuminator	Detachable
IR Indicator	No
Low Battery Indicator	No
Power Supply	1 x 3V(CR123A)
Battery Life	50 hrs
Environmental Rating	Waterproof
Operating Temperature	-40°F to +122°F -40°C to +50°C
Storage Temperature	-58°F to +158°F -50 to +70 °C
Dimensions
Weight
Warranty	2 years

No need to rezero your scope
Easily changes daytime scope to Night Vision
Waterproof
Lightweight and rugged
Fast catadioptric front lens system
Mounts in front of daytime scope, no re-zeroing required
Automatic Brightness Control
Resistance to severe conditions
Comes with Quick Release Mount

Gen 4 Night Vision

Please note that most high end night vision devices are built per order. It may take 3-5 days or more for your order to ship. If timely shipping is important to you, please, contact us to verify availability prior to ordering.

Generation 4 IIT is equivalent to FLAG Filmless Autogated IIT.

Gated/Filmless technology represents the biggest technological breakthrough in image intensification of the past 10 years. By removing the ion barrier film and “Gating” the system Gen 4 demonstrates substantial increases in target detection range and resolution, particularly at extremely low light levels. The use of film less technology and auto-gated power supply in 4th generation image intensifiers result in: Up to 100% improvement in photo response. Superb performance in extremely low light level (better S/N and EBI). At least triple high light level resolution (a minimum of 36 lp/mm compared to 12 lp/mm).

4th GEN. GATED/FILMLESS IIT Autogated / Filmless inverting image intensifier tubes improve night operational effectiveness for users of night vision goggles and other night vision devices. The filmless micro channel plate provides a higher signal-tonoise ratio than standard 3rd Gen. IITs, resulting in better image quality under low-light conditions. An Autogated power supply further improves image resolution under high light conditions and a reduced halo effect that minimizes interference from bright light sources. The reduced Halo maximizes the effectiveness of the Night Vision device in dynamic lighting conditions such as those experienced, for example, in night operations in urban areas.

4th Gen. IIT Features:

• Photo Cathode type: Filmless GaAs
• Resolution from 64 to 72 lp/mm
• Signal-to-Noise Ratio from 25 to 30
• Autogated power Supply
• 10,000-hour tube life

Delivery Time and Manufacturing Process for ATN PS28-4 Night Vision Clipon Sight:

Most of our manufacturers do not keep products like ATN PS28-4 Night Vision Clipon Sight assembled on the shelf. Night Vision tubes are kept separate from the body of the unit. When the order is placed, the manufacturer starts the order processing and assembly process which includes the following:

Order processing - we collect all the necessary information including address and phone numbers. We also make sure that our customer ordered the correct product for their needs and that the product can be exported by US law to the country of destination. In some cases a signed export compliance form is required.
QC - in this step the manufacturer will inspect all individual parts which will be used to assemble the night vision device for any defects.
Production & Assembly - during production, all the parts are put together. Night Vision tubes in inserted into the body of the unit and all the complex electronics for the device are connected. This process takes place in a special lab called the "clean room" as even a small speckle of dust can cause undesired optical effect.
QA - one the night vision device is assembled, it goes through a rigorous testing process to make sure it meets all the expected specifications and all parts function as expected. For this most manufacturers have a special "dark room" designed to allow testing of the units without causing incidental damage to the night vision tube by exposure to bright light.
Packaging - this is a key process as well. In most case your night vision device will be shipped to you directly from the manufacturer but sometimes needs to be sent to us first. In either case items need to be packaged securely to avoid any kind of damage during transportation.
Shipping - as described above items will most of the time ship from the manufacturer. For most domestic orders (unless shipping to POB or AFB) a premium shipper like FedEx or UPS will be used.

Only by following the above steps can we along with our manufacturers bring you - our customer - night vision products of highest quality, However as you can understand the above process can take several days to complete. For example if your device fails QA, the entire process restarts. Also at QC stage a manufacturer may realize that the tube they have in stock has a defect and a replacement tube needs to be ordered. Due to the complexity of this process, it is prudent to expect 3-4 business days for production and handling of the purchased device. Keep in mind that this process is designed to guarantee your satisfaction with the night vision device of your choice. It occasionally possible to expedite the process for urgent orders but addional fees or other restrictions may apply.