ATN PS28-2 Night Vision Clipon Attachment
Discover Incredible Savings Without Compromising On Quality
Bering Optics Rubicon Pro Waterproof Reflex sight with a front control button MKP
Pulsar Thermion 2 LRF XP50 PRO Thermal Imaging Riflescopes MKP
Pulsar Thermion Duo DXP50 Multispectral Thermal Riflescope MKP
Pulsar Thermion Duo DXP55 Multispectral Thermal Riflescopes MKP
Pulsar Merger LRF XL 50 Thermal Imaging Rangefinding Binoculars MKP
The ATN PS40 series are attachment scopes built to easily connect to a daytime riflescope, quickly and very efficiently while, at the same time, offering an incredible 40 mm eye piece for increased vision ability. These scopes have been specifically designed to be easy and extremely fast to set up, so that you don’t have to worry about fitting your night vision scope when you are on the field. No re zeroing is necessary with these scopes, making it supremely easy and stress free to switch between your daytime riflescope and the ATN PS40. This is just part of what makes the ATN PS40 such a robust series of night vision attachment scopes.
This scope comes with a Quick Release Mount, meaning that it can be removed and replaced with your regular daytime scope in under thirty seconds. This kind of turn around in scope replacement is absolutely necessary for the professional who needs to be able to use his scope all the time and doesn’t want to waste time switching between day and night vision technology. The ATN PS40 is designed to be quick and easy in attachment and detachment, so you can stay focused on more important matters no matter what.
The model you are currently viewing is the ATN PS40-2, which offers a Generation 2+ image intensifier tube and a resolution of 40/45 lp/mm. It has a Total Darkness Infra Red System as well, meaning that even in tight corners and situations where you do not have any light to amplify, the trusty ATN PS40-2 will not leave you high and dry. You will be able to use infra red technology to sustain visibility. This technology is priceless in a night vision scope, especially an attachable one.
The ATN PS40-2 also has an f/1.44 lens system. It also brags Automatic Brightness Control as well as a Bright Light Cut Off, these add functionality that make it easy to keep your lens in good condition and make sure that you get a long life out of your night vision attachable scope. The night scope is waterproof, as well.
The ATN PS40-2 offers 60 hours of battery life and weighs 1.85 pounds.
It comes with a two year warranty.
As with all our Night Vision and Thermal Imaging devices, Night Vision Guys offers competitive pricing on the best devices. The high quality of these devices guarantees that they will meet your expectations and serve you well. Buying these units from NightVisionGuys.com guarantees quick handling as well as excellent service and price.
| Total Darkness IR System | Yes |
| SMART Technology | No |
| IIT Generation | 2+ |
| Resolution | 40-45 lp/mm |
| Magnification | 1x |
| Lens System | F1:1.44, 80mm |
| Proshield Lens Coating | Yes |
| FOV | 12 |
| Exit Pupil | 40 mm |
| Range of Focus | 10 m to infinity |
| Diopter Adjustment | No |
| Controls | Direct |
| Remote Control | Yes |
| Automatic Brightness Control | Yes |
| Bright Light Cut-off | Yes |
| Infrared Illuminator | Detachable IR450 (optional) |
| IR Indicator | Yes |
| Low Battery Indicator | Yes |
| Power Supply | 1 x 1.5V AA type battery or |
| 1 x 3V CR123A type battery | |
| Battery Life | 60 hours ( 3 V ) |
| 30 hours (1. 5 V ) | |
| Reticle System | No |
| Windage & Elewation Adjustment | No |
| Environmental Rating | Waterproof |
| MIL-STD-810 | Yes |
| Operating Temperature | -20 to +50 C |
| Storage Temperature | -50 to +50 C |
| Dimensions | 177 x 85 x 83 mm |
| 7.0 x 3.4 x 3.3 | |
| Weight | 0.84 kg / 1.85 lbs |
| Warranty | 2 years |
Mounts in front of daytime scope, no re-zeroing required
Multi-coated all-glass optics
Fast catadioptic front lens system
Large 40 mm eyepiece/output window
Comes with Quick Release Mount
Optional 7/8 weaver mount
Optional Scope Mounting System attaches the PS40 unit to the objective of the day scope (47-50; 56-58.7 mm diameter)
Automatic brightness control
Limited Two-Year Warranty
Gen 2 Night Vision
Please note that most high end night vision devices are built per order. It may take 3-5 days or more for your order to ship. If timely shipping is important to you, please, contact us to verify availability prior to ordering.
2nd generation is primarily used by law enforcement or for professional applications. This is because the cost of a 2nd Gen. unit is approximately $500.00 to $1000.00 more then a 1st Gen. The main difference between a 1st and a 2nd generation unit is the addition of a micro-channel plate, commonly referred to as a MCP. The MCP works as an electron amplifier and is placed directly behind the photocathode. The MCP consists of millions of short parallel glass tubes. When the electrons pass through these short tubes, thousands more electrons are released. This extra process allows 2nd generation units to amplify the light many more times then 1st generation giving you a brighter and sharper image. 2nd Gen. IIT standard 2nd generation tubes are high quality with exceptional brightness and resolution. Each tube has a micro channel plate, multi-alkaline photocathode with built-in power supply.
2nd Gen. IIT Features:
• Photo Cathode type: Multi-Alkali
• Resolution from 40 to 45 lp/mm
• Signal-to-Noise Ratio from 12 to 20
• 5,000+ hour tube life
Delivery Time and Manufacturing Process for ATN PS40-2 Day-Night System:
Most of our manufacturers do not keep products like ATN PS40-2 Day-Night System assembled on the shelf. Night Vision tubes are kept separate from the body of the unit. When the order is placed, the manufacturer starts the order processing and assembly process which includes the following:
- Order processing - we collect all the necessary information including address and phone numbers. We also make sure that our customer ordered the correct product for their needs and that the product can be exported by US law to the country of destination. In some cases a signed export compliance form is required.
- QC - in this step the manufacturer will inspect all individual parts which will be used to assemble the night vision device for any defects.
- Production & Assembly - during production, all the parts are put together. Night Vision tubes in inserted into the body of the unit and all the complex electronics for the device are connected. This process takes place in a special lab called the "clean room" as even a small speckle of dust can cause undesired optical effect.
- QA - one the night vision device is assembled, it goes through a rigorous testing process to make sure it meets all the expected specifications and all parts function as expected. For this most manufacturers have a special "dark room" designed to allow testing of the units without causing incidental damage to the night vision tube by exposure to bright light.
- Packaging - this is a key process as well. In most case your night vision device will be shipped to you directly from the manufacturer but sometimes needs to be sent to us first. In either case items need to be packaged securely to avoid any kind of damage during transportation.
- Shipping - as described above items will most of the time ship from the manufacturer. For most domestic orders (unless shipping to POB or AFB) a premium shipper like FedEx or UPS will be used.
Only by following the above steps can we along with our manufacturers bring you - our customer - night vision products of highest quality, However as you can understand the above process can take several days to complete. For example if your device fails QA, the entire process restarts. Also at QC stage a manufacturer may realize that the tube they have in stock has a defect and a replacement tube needs to be ordered. Due to the complexity of this process, it is prudent to expect 3-4 business days for production and handling of the purchased device. Keep in mind that this process is designed to guarantee your satisfaction with the night vision device of your choice. It occasionally possible to expedite the process for urgent orders but addional fees or other restrictions may apply.
From Our Community
Question
What range can I expect to identify targets? I am a predator caller and hope to find a device to use for spotting target at a distance and then making a shot.
From Aaron Peterson on Dec 07, 2015
Answer
hi Aaron. Thank you for your question. With PS40-2 night vision clipon you can expect around 120-140 yards. Much depends on the daytime scope you are using as well. Based on what you are planning to use this device for, I would suggest speaking to one of our product experts as I think there are better options available for what you are trying to achieve. Please let us know how you would like to be contact so they can fully evaluate your needs and make correct suggestions.
