Pulsar Challenger GS Super 1+ 1x20 Night Vision Goggles
D-112 GEN 1+ NIGHT VISION MONO-GOGGLE
Discover Incredible Savings Without Compromising On Quality

Bering Optics Rubicon Pro Waterproof Reflex sight with a front control button MKP



Pulsar Thermion 2 LRF XP50 PRO Thermal Imaging Riflescopes MKP




Pulsar Thermion Duo DXP50 Multispectral Thermal Riflescope MKP

Pulsar Thermion Duo DXP55 Multispectral Thermal Riflescopes MKP

Pulsar Merger LRF XL 50 Thermal Imaging Rangefinding Binoculars MKP

AGM Adder TS50-640 Thermal Imaging Rifle Scope 12um, 640x512 (50 Hz), 50 mm lens MKP
The Pulsar Challenger GS 1x20 is a multifunctional night vision device. The Pulsar Challenger GS 1x20 has a number of applications. It can be used as a night vision monocular, night vision goggles (if set up on a Head Mount; the device can be used either for the right or the left eye), and a night attachment for a day optical riflescope or a collimator sight. The body of the Pulsar Challenger device is hermetically sealed which enables use in inclement weather (fog, heavy shower, dusty environment, sand storm etc.)
Intensifier Tube | Gen I |
Magnification | 1.0x |
Objective Lens Diameter | 20 mm |
Angle/Field of View | 36° |
Minimum Focus Distance | Not specified by mfr |
Exit Pupil | 6 mm |
Eye Relief | 12 mm |
Dioptric Correction | +/- 4 |
Infrared Illuminator | Yes |
Power Supply | (1) CR123 battery |
Weatherproofing | IP46 compliant |
Temperature Ranges | -4 to 104°F (-20 to 40°C) |
Dimensions | 6.3 x 3 x 2.4" (16 x 8 x 6 cm) |
Weight | Monocular: 10.5 oz (300 g) |
• Single switch button operation
Gen 1 Night Vision
1st generation is currently the most popular type of night vision in the world. Utilizing the basic principles described in detail in our guide, a 1st generation unit will amplify the existing light several thousand times letting you clearly see in the dark. These units provide a bright and sharp image at a low cost, which is perfect, whether you are boating, observing wildlife, or providing security for your home. You may notice the following when you are looking through a 1st Gen. unit. A slight high-pitched whine when the unit is on. The image you see may be slightly blurry around the edges. This is known as Geometric Distortion. When you turn a 1st Gen. unit off it may glow green for some time. These are inherent characteristics of a 1st Gen. unit and are normal.