New for 2014, another great night vision device from ATN. ATN PS28 replaces the well acclaimed PS22 model.

New design and enhanced performance make this device even better. With the supplied quick release mount, automatic brightness adjustment, and low weight this night vision clipon delivers fantastic results. This particular model sports the Gen 3 Pinnacle night vision tube which gives the best possible performance and reliability.

Thanks to the many included adapters and optional mounting brackets, ATN PS28-3P (NVDNPS283P) can be matched up with practically any day time device. The way this works is that the ATN PS28-3P night vision clipon attaches in the from of the day time unit. It can either attach on a rail or directly onto the daytime optic by means of an optional mounting bracket. As a result, you never have to re-zero your day time device. The entire process takes seconds and you are ready to control the night thanks to the ATN PS28-3P night vision clipon.

ATN PS28 Night Vision Clipon can be purchased with various night vision tubes ranging from a standard Gen 2 and all the way to Gen 4. Though not ideal for that purpose PS28-3P can serve as a handheld monocular when you need to quickly survey the surroundings.

As always please feel free to contact us if you have any questions or if you found a better price on another site. If such an unlikely even occurs, we will certainly match surpass any discount on ATN products and ATN PS28-3P night vision clipon in particular.

Another great use for ATN PS28-3P night vision clipon is on a photo camera or a spotting scope. Once again, feel free to contact us for some creative night vision solutions..

ATN PS28 Night Vision Day/Night system ships with these accessories:

Instruction Manual
Lens Tissue
One Lithium Battery
Packing box
Warranty card
Mil-Spec Hard Case
IR450-B4
Quick Release Mount
Remote Control Unit

Total Darkness IR System	Yes
IIT Generation	3P
Resolution	64-72 lp/mm
Signal to Noise Ratio	25-30
Figure of Merit	1800 Typical
MTTF - Mean Time Before Failure	10,000 hours
Magnification	1x
Lens System
Proshield Lens Coating
FOV
Range of Focus
Diopter Adjustment	No
Controls	Direct
Automatic Brightness Control	Yes
Bright Light Cut-off	Yes
Infrared Illuminator	Detachable
IR Indicator	No
Low Battery Indicator	No
Power Supply	1 x 3V(CR123A)
Battery Life	50 hrs
Environmental Rating	Waterproof
Operating Temperature	-40°F to +122°F -40°C to +50°C
Storage Temperature	-58°F to +158°F -50 to +70 °C
Dimensions
Weight
Warranty	2 years

No need to rezero your scope
Easily changes daytime optics to Night Vision
Waterproof
Lightweight and rugged
Fast catadioptric front lens system
Mounts in front of daytime optic, no re-zeroing required
Automatic Brightness Control
Resistance to severe conditions
Comes with Quick Release Mount

Gen 3P Night Vision

Please note that most high end night vision devices are built per order. It may take 3-5 days or more for your order to ship. If timely shipping is important to you, please, contact us to verify availability prior to ordering.

Our Night Vision units with the 3P designation use ITT Pinnacle™ Image Intensifier tubes. The industry leading ITT Pinnacle™ image tubes utilize a gated power supply providing truly outstanding performance in high-light or light-polluted areas, such as urban environments. The Pinnacle™ tube with gated power supply minimizes any “halo” effects. “Halo” is often associated with using night vision devices in an urban area where random street lights are often an issue with early Generation Night Vision devices. Night Vision units with Pinnacle™ tubes have a resolution of 57-64lp/mm and a typical signal to noise ratio between 16.2 and 25 . All Night Vision devices utilizing Pinnacle™ Image Intensifier tubes come with ITT data record sheet. Units with Pinnacle™ tubes are not available for export. A signed export compliance and end use statement is required prior to shipping of these units. As with all night vision tubes, each one coming off the production best has different parameters. We can help you with picking the parameters which will fit your needs and the price of the device will depend on the quality of the tube you select.

3P Gen. ITT Pinnacle™ IIT Features:

• Photo Cathode type: Gallium Arsenide
• Resolution from 57 to 64 lp/mm
• Signal-to-Noise Ratio: 16.2-25
• 10,000-hour tube life

* Pinnacle is a registered trademark of ITT Night Vision

Delivery Time and Manufacturing Process for ATN PS28-3P Night Vision Clipon:

Most of our manufacturers do not keep products like ATN PS28-3P Night Vision Clipon assembled on the shelf. Night Vision tubes are kept separate from the body of the unit. When the order is placed, the manufacturer starts the order processing and assembly process which includes the following:

Order processing - we collect all the necessary information including address and phone numbers. We also make sure that our customer ordered the correct product for their needs and that the product can be exported by US law to the country of destination. In some cases a signed export compliance form is required.
QC - in this step the manufacturer will inspect all individual parts which will be used to assemble the night vision device for any defects.
Production & Assembly - during production, all the parts are put together. Night Vision tubes in inserted into the body of the unit and all the complex electronics for the device are connected. This process takes place in a special lab called the "clean room" as even a small speckle of dust can cause undesired optical effect.
QA - one the night vision device is assembled, it goes through a rigorous testing process to make sure it meets all the expected specifications and all parts function as expected. For this most manufacturers have a special "dark room" designed to allow testing of the units without causing incidental damage to the night vision tube by exposure to bright light.
Packaging - this is a key process as well. In most case your night vision device will be shipped to you directly from the manufacturer but sometimes needs to be sent to us first. In either case items need to be packaged securely to avoid any kind of damage during transportation.
Shipping - as described above items will most of the time ship from the manufacturer. For most domestic orders (unless shipping to POB or AFB) a premium shipper like FedEx or UPS will be used.

Only by following the above steps can we along with our manufacturers bring you - our customer - night vision products of highest quality, However as you can understand the above process can take several days to complete. For example if your device fails QA, the entire process restarts. Also at QC stage a manufacturer may realize that the tube they have in stock has a defect and a replacement tube needs to be ordered. Due to the complexity of this process, it is prudent to expect 3-4 business days for production and handling of the purchased device. Keep in mind that this process is designed to guarantee your satisfaction with the night vision device of your choice. It occasionally possible to expedite the process for urgent orders but addional fees or other restrictions may apply.