ATN THOR-HD 384 4.5-18x50 Thermal Rifle Scope
Discover Incredible Savings Without Compromising On Quality
Bering Optics Rubicon Pro Waterproof Reflex sight with a front control button MKP
Pulsar Thermion 2 LRF XP50 PRO Thermal Imaging Riflescopes MKP
Pulsar Thermion Duo DXP50 Multispectral Thermal Riflescope MKP
Pulsar Thermion Duo DXP55 Multispectral Thermal Riflescopes MKP
Pulsar Merger LRF XL 50 Thermal Imaging Rangefinding Binoculars MKP
From Night Vision Guys about ThOR-320 6X Thermal Weapon Sight TIWSMT326D
Once again ATN decided to bring back the 6X variation of the ThOR. This 324x256 sensor model sports all the same great features as other ThOR rifle scopes but adds the highly capable 6x lens. This plugs the range hole between the 4.5x and the 9x Thor models.
TIWSMT326D is priced very well and will provide the human recognition range of 800 meters. With ATN ThOR-320 6x on your rifle, your targets will have nowhere to hide. Even fog and extreme darkness are no protection against this thermal weapon sight.
Each ATN ThOR-320 6x Thermal rifle scope ships with:
From ATN about ThOR-320 6X Thermal Weapon Sight TIWSMT326D
ATN Thermal Imaging Has Gone Digital! ATN is proud to introduce the newest line of ThOR Thermal Weapon Scopes . The most advanced night vision technology available is brought to you by the premier company dedicated to providing night vision systems at affordable prices. The new ThOR line is rich with features and options making it the best value of any comparable system on the market. This model is lightweight and small enough to fit in the palm of your hand, yet it’s rugged and durable. The entire system is built in the USA, utilizing Mil-Spec Lenses that make the ThOR battleworthy for most any mission, operation, or outdoor activity. Each system features a digital menu that gives you a variety of options and adjustments allowing you to customize your system. You can select a number of reticle options as well as choose a reticle color best suited for your specific application. No more black reticles on a black and white screen – ThOR features a color OLED display giving you a sharp color reticle every time. Or switch to full color mode and overlay it with either a black, red, blue, white or black reticle depending on the conditions and the environment. Ever have problems with a scope not being able to hold zero? The ThOR has no screws or springs that can create targeting errors. With all digital controls, the ThOR will NEVER allow your reticle to move off base. The new ThOR Thermal Weapon Scope provides provide amazing image quality through total darkness, fog, or smoke. Darkness, camouflage or bright lights will not affect the sensitivity of these units. All units have feature E-Zoom to expand your optical magnification. They’re Ideal for nighttime hunting, force protection, border patrol, police SWAT and special operations. And they feature a video-out connection and cable which will let you capture your nighttime operation on video. These units are priced like no other thermal devices in their class – as much as half of what you would expect to pay! No other product is comparable in value or price. The ATN ThOR functions equally well as a weapon scope or a handheld viewer. Once you experience Digital Thermal you may not want to use anything else again!
| Sensor (microbolometer) | 324x256 px |
| Type | Uncooled |
| Material | Vanadium oxide (VOx) |
| Image Size (output resolution) | 800x600 px |
| Frame rate | 60 Hz |
| Video output | Yes |
| Display | Color OLED matrix, SVGA< 800x600 Color background + color reticules |
| Thermal Sensitivity | <50 mK |
| Spectral Response | 7-14 μm |
| Lens System | 100 mm |
| Field of View (H x V) | 4.5°x3.5° |
| Eye Relief | 28 mm |
| Optical Magnification | 6X |
| E-Zoom | 12X, 24X |
| Diopter Adjustment | |
| Distance of the human detection | 2000 m |
| Distance of the human recognition | 800 m |
| Distance of the human identification | 475 m |
| Distance of the vehicle detection | 4000 m |
| Distance of the vehicle recognition | 1700 m |
| Distance of the vehicle identification | 1100 m |
| Reticle | Multiple Reticles to Choose From |
| Reticle Color | Red, Green, Blue, White & Black |
| Brightness adjustment | Manual |
| Sharpness adjustment | Automatic |
| Polarity control | White hot / Black hot / Multiple Color Modes |
| Start up time | <3 sec |
| Environmental Rating | Waterproof / Dustproof |
| Battery type | 3 x CR123A battery type |
| Battery Life | 8+ hrs |
| Mounting bracket | MIL-STD 1913 Picatinny (Quick) |
| Output computer set up | Yes |
| Low Battery Indicator | Yes |
| Iconology | Quick access, Icon driven feature controls |
| Dimensions(without bracket) | 10.3" x 3.7" x 2.87" / 262 x 94 x 73 mm |
| Weight, grams | 3.1 lb /1.4 kg |
| Warranty | 3 year standard/10 year sensor |
- 3 year standard/10 year sensor warranty
- Multiple Color Modes
- 5 different reticles with choice of reticle color
- 6x magnification
- Light and compact design
- Waterproof
- Made in USA
- MIL-STD 1913 Picatinny (Quick)
Thermal Imaging
Please note that most thermal devices are built per order. It may take 3-5 days or more for your order to ship. If timely shipping is important to you, please, contact us to verify availability prior to ordering.
Thermal devices can produce various types of images. Some are color others are monochrome. In either case change in shade or color indicates temperature differences.
Here is how thermal imaging devices work...
A special lens focuses the infrared light emitted by all of the objects in view.
The focused light is scanned by a phased array of infrared-detector elements. The detector elements create a very detailed temperature pattern called a thermogram. It only takes about one-thirtieth of a second for the detector array to obtain the temperature information to make the thermogram. This information is obtained from several thousand points in the field of view of the detector array.
The thermogram created by the detector elements is translated into electric impulses.
The impulses are sent to a signal-processing unit, a circuit board with a dedicated chip that translates the information from the elements into data for the display.
The signal-processing unit sends the information to the display, where it appears as various colors depending on the intensity of the infrared emission. The combination of all the impulses from all of the elements creates the image.
There are a few key Manufacturers when it comes to thermal imaging.
ATN: produce such well knows devies as ThOR-HD thermal scope, BINOX-THD thermal binoculars, and OTS-HD thermal monocular.
FLIR/Armasight: the largest maker of consumer level thermal products is well knows for their full product line. Zeus thermal scopes, Q14 and Scout monoculars, Helios and Scout binoculars and many more.
Pulsar: a very popular brand for digital night vision and thermal imaging. Key products include Pulsar Trail and Apex thermal scopes and Pulsar Helion and Quantum thermal monoculars.
Seek: mobile device mounted thermal cameras are the main products of this brand.
Delivery Time and Manufacturing Process for ATN ThOR-320-6X 60Hz Thermal Rifle Scope:
Most of our manufacturers do not keep products like ATN ThOR-320-6X 60Hz Thermal Rifle Scope assembled on the shelf. Night Vision tubes are kept separate from the body of the unit. When the order is placed, the manufacturer starts the order processing and assembly process which includes the following:
- Order processing - we collect all the necessary information including address and phone numbers. We also make sure that our customer ordered the correct product for their needs and that the product can be exported by US law to the country of destination. In some cases a signed export compliance form is required.
- QC - in this step the manufacturer will inspect all individual parts which will be used to assemble the night vision device for any defects.
- Production & Assembly - during production, all the parts are put together. Night Vision tubes in inserted into the body of the unit and all the complex electronics for the device are connected. This process takes place in a special lab called the "clean room" as even a small speckle of dust can cause undesired optical effect.
- QA - one the night vision device is assembled, it goes through a rigorous testing process to make sure it meets all the expected specifications and all parts function as expected. For this most manufacturers have a special "dark room" designed to allow testing of the units without causing incidental damage to the night vision tube by exposure to bright light.
- Packaging - this is a key process as well. In most case your night vision device will be shipped to you directly from the manufacturer but sometimes needs to be sent to us first. In either case items need to be packaged securely to avoid any kind of damage during transportation.
- Shipping - as described above items will most of the time ship from the manufacturer. For most domestic orders (unless shipping to POB or AFB) a premium shipper like FedEx or UPS will be used.
Only by following the above steps can we along with our manufacturers bring you - our customer - night vision products of highest quality, However as you can understand the above process can take several days to complete. For example if your device fails QA, the entire process restarts. Also at QC stage a manufacturer may realize that the tube they have in stock has a defect and a replacement tube needs to be ordered. Due to the complexity of this process, it is prudent to expect 3-4 business days for production and handling of the purchased device. Keep in mind that this process is designed to guarantee your satisfaction with the night vision device of your choice. It occasionally possible to expedite the process for urgent orders but addional fees or other restrictions may apply.
From Our Community
Question
II HAVE BEEN TRYING TO SITE THIS SCOPE IN DURING THE DAY IF THAT MATTERS,I CANNOT HARDLY SEE THE TARGET THROUGHT THE SCOPE AT 100 YARDS .HOW DO YOU LOCK MY CROSSHAIRS IN AT THE CENTER OF THE SCOPE WHEN I AJUSTED THEM AT THE BOTTOM OF THE SCREEN.PLEASE HELP . MY SCOPE DID NOT COME WITH A MANUAL.
From JACK on Dec 10, 2014
Answer
Hi Jack. The best way to sight in a thermal scope is to have some sort of temperature contrast on your target. one trick that many people use is a bear bottle cap held in ice and then nailed to the center of your target. This should stand out pretty well for you. There are also special thermal imaging targets available online but you should be just fine with the cap trick.
