Discover Incredible Savings Without Compromising On Quality
Bering Optics Rubicon Pro Waterproof Reflex sight with a front control button MKP
Pulsar Thermion 2 LRF XP50 PRO Thermal Imaging Riflescopes MKP
Pulsar Thermion Duo DXP50 Multispectral Thermal Riflescope MKP
Pulsar Thermion Duo DXP55 Multispectral Thermal Riflescopes MKP
Pulsar Merger LRF XL 50 Thermal Imaging Rangefinding Binoculars MKP
PVS-7BE B&W NV Viewer with a high power 6.6x83 Lens, High Performance White Phosphor Gen 2+
A High Performance Generation 2 Image Tube is the best Gen 2 image tube available. It gives vastly superior performance than the lessor Gen 2 MS (Mil-Spec) or Gen 2 ST (Standard) image tubes. The performance is very close to Gen 3, however the image tube life is usually quite a bit shorter than a Generation 3 image tube so when available in a similar price range we recommend going with the Gen 3 unit.
The PVS-7 Night Vision Goggles are the most recognized night vision device in the world. These combat proven night vision goggles are the standard issue in every modern military. With a high performance Gen 2 image tube, the PVS-7 will not disappoint. The single tube, bi-ocular configuration provides an excellent performance to cost ratio, and is known for it's rock solid reliability and excellent performance. The versatile, combat-proven PVS-7 can be used as a hands-free goggle or a hand-held, long-range observation device when coupled with optional 3x, 4x and 5x magnifiers. With a single Image Intensifier dual-eye configuration, the PVS-7 provides an excellent performance-to-cost ratio.
The PVS-7 features simple user controls, fully automated image tube protection, a built-in infrared illuminator with a momentary and continuous-on switch plus IR operation and low battery indicators displayed within the user's field of view.
The fast (f1.12) one-power lens provides optimal low-light capabilities as well as freedom of movement for completely hands-free operation.
Included items:
- Soft Case
- Mil Spec Headgear
- Sacrificial Filters
- Neckstrap
- (2) Demist Shields
- (2) AA Batteries
- Lens Cleaning Paper
- Operating Manual
- Warranty Card
- Easy to operate with the user friendly controls
- Comfortable bi-ocular eyepiece
- Lightweight rugged design
- Automatic brightness control
- Inter-pupillary adjustment from 55 mm to 76 mm
- Superior for prolonged surveillance
- Tripod mountable
Specification:
PVS-7BE B&W NV Viewer with a high power 6.6x83 Lens, High Performance White Phosphor Gen 2+
A High Performance Generation 2 Image Tube is the best Gen 2 image tube available. It gives vastly superior performance than the lessor Gen 2 MS (Mil-Spec) or Gen 2 ST (Standard) image tubes. The performance is very close to Gen 3, however the image tube life is usually quite a bit shorter than a Generation 3 image tube so when available in a similar price range we recommend going with the Gen 3 unit.
The PVS-7 Night Vision Goggles are the most recognized night vision device in the world. These combat proven night vision goggles are the standard issue in every modern military. With a high performance Gen 2 image tube, the PVS-7 will not disappoint. The single tube, bi-ocular configuration provides an excellent performance to cost ratio, and is known for it's rock solid reliability and excellent performance. The versatile, combat-proven PVS-7 can be used as a hands-free goggle or a hand-held, long-range observation device when coupled with optional 3x, 4x and 5x magnifiers. With a single Image Intensifier dual-eye configuration, the PVS-7 provides an excellent performance-to-cost ratio.
The PVS-7 features simple user controls, fully automated image tube protection, a built-in infrared illuminator with a momentary and continuous-on switch plus IR operation and low battery indicators displayed within the user's field of view.
The fast (f1.12) one-power lens provides optimal low-light capabilities as well as freedom of movement for completely hands-free operation.
Included items:
- Soft Case
- Mil Spec Headgear
- Sacrificial Filters
- Neckstrap
- (2) Demist Shields
- (2) AA Batteries
- Lens Cleaning Paper
- Operating Manual
- Warranty Card
- Easy to operate with the user friendly controls
- Comfortable bi-ocular eyepiece
- Lightweight rugged design
- Automatic brightness control
- Inter-pupillary adjustment from 55 mm to 76 mm
- Superior for prolonged surveillance
- Tripod mountable
Gen 2 Night Vision
Please note that most high end night vision devices are built per order. It may take 3-5 days or more for your order to ship. If timely shipping is important to you, please, contact us to verify availability prior to ordering.
2nd generation is primarily used by law enforcement or for professional applications. This is because the cost of a 2nd Gen. unit is approximately $500.00 to $1000.00 more then a 1st Gen. The main difference between a 1st and a 2nd generation unit is the addition of a micro-channel plate, commonly referred to as a MCP. The MCP works as an electron amplifier and is placed directly behind the photocathode. The MCP consists of millions of short parallel glass tubes. When the electrons pass through these short tubes, thousands more electrons are released. This extra process allows 2nd generation units to amplify the light many more times then 1st generation giving you a brighter and sharper image. 2nd Gen. IIT standard 2nd generation tubes are high quality with exceptional brightness and resolution. Each tube has a micro channel plate, multi-alkaline photocathode with built-in power supply.
2nd Gen. IIT Features:
• Photo Cathode type: Multi-Alkali
• Resolution from 40 to 45 lp/mm
• Signal-to-Noise Ratio from 12 to 20
• 5,000+ hour tube life
Delivery Time and Manufacturing Process for PVS-7BE B&W NV Viewer with a high power 6.6x83 Lens, High Performance White Phosphor Gen 2+:
Most of our manufacturers do not keep products like PVS-7BE B&W NV Viewer with a high power 6.6x83 Lens, High Performance White Phosphor Gen 2+ assembled on the shelf. Night Vision tubes are kept separate from the body of the unit. When the order is placed, the manufacturer starts the order processing and assembly process which includes the following:
- Order processing - we collect all the necessary information including address and phone numbers. We also make sure that our customer ordered the correct product for their needs and that the product can be exported by US law to the country of destination. In some cases a signed export compliance form is required.
- QC - in this step the manufacturer will inspect all individual parts which will be used to assemble the night vision device for any defects.
- Production & Assembly - during production, all the parts are put together. Night Vision tubes in inserted into the body of the unit and all the complex electronics for the device are connected. This process takes place in a special lab called the "clean room" as even a small speckle of dust can cause undesired optical effect.
- QA - one the night vision device is assembled, it goes through a rigorous testing process to make sure it meets all the expected specifications and all parts function as expected. For this most manufacturers have a special "dark room" designed to allow testing of the units without causing incidental damage to the night vision tube by exposure to bright light.
- Packaging - this is a key process as well. In most case your night vision device will be shipped to you directly from the manufacturer but sometimes needs to be sent to us first. In either case items need to be packaged securely to avoid any kind of damage during transportation.
- Shipping - as described above items will most of the time ship from the manufacturer. For most domestic orders (unless shipping to POB or AFB) a premium shipper like FedEx or UPS will be used.
Only by following the above steps can we along with our manufacturers bring you - our customer - night vision products of highest quality, However as you can understand the above process can take several days to complete. For example if your device fails QA, the entire process restarts. Also at QC stage a manufacturer may realize that the tube they have in stock has a defect and a replacement tube needs to be ordered. Due to the complexity of this process, it is prudent to expect 3-4 business days for production and handling of the purchased device. Keep in mind that this process is designed to guarantee your satisfaction with the night vision device of your choice. It occasionally possible to expedite the process for urgent orders but addional fees or other restrictions may apply.
